What are the standards for floor acceptance inspection using epoxy floor paint? Epoxy floor paint is a high quality and demanding product. It needs good maintenance in the use process. It can not only prolong the use, but also keep the ground as new as possible. 1. There is no sticking phenomenon on the surface; 2. There is no traces of trowels on the surface, which is smooth and seamless; 3. Minimal defects caused by fine particles in the allowable air; 4. The anti-slip surface of mortar has obvious effect and no volatile organic compounds, which is widely used in modern industrial floor painting; 5. The suitable temperature is about 25 degrees, which is suitable for construction. After three days, the hardness of the ground is about 80%. 6、平涂型、砂浆型无气泡，自流平地面允许十平方内有一个小气泡；
6, flat coated and mortar type without bubbles. The self leveling ground allows ten small bubbles in the square.
7, the floor is not flower, the color is uniform, large area excuse is allowed to have small color.
8, the ground is smooth, glossy, smooth and glossy, semi glossy or matte.
The specific recommendations for maintenance are as follows:
1. The workers in the workshop need to replace them with rubber soles to avoid damage to the workshops.
2, heavy machinery needs to pay attention to the machine plate angle scratching the ground when turning.
3. Wear or scratch caused by long use time can be repaired locally, if large area can be re-rolled once.
4. Wheel of cart or scooter can be used inside and outside the workshop with elastic rubber wheel.
5. Generally new floors can only be used after ten days. During this period, water or other solutions should not be spilled on the ground.
6. When cleaning the ground, use a dry-wet vacuum cleaner with good soft water absorption. If there is oil stain, clean it with clean water or detergent.
7, wax processing can also be done according to the ground requirements.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 环氧地坪翻新