欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 新闻资讯

    厂家揭示翅片管生产技术现状?【总结篇】

    2018-11-06 19:16:00 无锡盛发地坪科技有限公司 阅读

    1、套装翅片管:套装翅片管工艺是预先用冲床加工出一批单个的翅片管,然后用人工或机械方法,按一定的距高(翅距),靠过盈将翅片套装在管子外表面上。它是应用最早的一种加工翅片管的方法。
    1. Set finned tube: Set finned tube technology is to pre-process a batch of single finned tube with punch, and then use manual or mechanical methods, according to a certain distance (fin pitch), by interference will be set on the outside surface of the tube. It is the earliest method of finned tube processing.
    2、镶嵌式螺旋翅片:镶嵌式螺旋翅片管是在钢管上预先加工出一定宽度和深度的螺旋槽,然后在车床上把钢带镶嵌在钢管上。在缠绕过程中,由于有一定的预紧力,钢带会紧紧地勒在螺旋槽内,从而保证了钢带和钢管之间有一定的接触面积。
    2. Mosaic spiral fin: The mosaic spiral fin tube is a spiral groove with a certain width and depth pre-processed on the steel pipe, and then the steel strip is embedded on the steel pipe on the lathe. In the winding process, due to a certain pre-tightening force, the steel strip will be tightly tied to the spiral groove, thus ensuring a certain contact area between the steel strip and the steel pipe. 3、钎焊螺旋翅片管:钎焊螺旋翅片管的加工分两步进行。首先,将钢带平面垂直于管子轴线按螺旋线方式缠绕在管子外表面上,并把钢带两端焊在钢管上固定,然后为消除钢带和钢管接触处的间隙,用钎焊的方法将钢带和钢管焊在一起。
    3, brazing spiral fin tube: brazed spiral fin tube processing in two steps. Firstly, the steel strip is spirally wound on the outside surface of the pipe perpendicular to the axis of the pipe, and the two ends of the steel strip are welded on the steel pipe. Then, in order to eliminate the gap between the steel strip and the steel pipe, the steel strip and the steel pipe are welded together by brazing.
    4、高频焊螺旋翅片:高频高频焊螺旋翅片管是目前应用最为广泛的螺旋翅片管之一,现广泛应用于电力、冶金、水泥行业的余热回收以及石油化工等行业。
    4. High-frequency welding spiral fin: High-frequency welding spiral fin tube is one of the most widely used spiral fin tubes at present. It is widely used in power, metallurgy, cement industry, waste heat recovery and petrochemical industry.辛苦整理.转载请注明http://www.wxsxsjx.com


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 翅片管
    无锡环氧地坪 技术支持:【易商科技】