欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 常见问题

    刚做好没多久的环氧地坪怎么就脱落了呢?

    2018-11-06 09:12:55 无锡盛发地坪科技有限公司 阅读

    环氧地坪对于有接触过的人都知道,从上个世纪中后期开始欧美出现了很多以洁净为代表的车间环氧地坪,它采用整体聚合物面层现场施工涂装,分层施工整体层膜,没有缝隙、表面光亮颜色多彩,在工业环氧地坪领域至今都无法被取代。既然这么好,为什么有人说环氧地坪容易脱层、脱落呢?接下来小编跟大家一起来解析一下其中的原因和预防的方法。 Epoxy flooring is known to all who have contacted it. Since the middle and late of last century, many workshop floors in Europe and America, represented by cleanliness, have appeared. It uses integral polymer surface for on-site painting and layered construction of integral film. There are no gaps and the surface is bright and colorful. So far, it has not been adopted in the field of industrial flooring. Generation. Since this is so good, why is it that the epoxy floor is easy to peel off and fall off? Next, Xiaobian comes with you to analyze the causes and precautionary measures. 环氧地坪.jpg Epoxy floor.Jpg 

    原因: Reason: 

    1、底漆选择不当; 1. Improper primer selection. 

    2、涂料层间再涂时间过长; 2. The coating time is too long. 

    3、底漆过厚; 3. The primer is too thick. 

    4、重物堕落; 4, heavy objects fall; 

    5、油污面施工; 5. Construction of oil contaminated surface. 

    6、水泥层不坚固; 6, the cement layer is not strong; 

    8、施工水泥层有水压上升。 8, the construction of cement layer with water pressure rise. 

    预防方法: Prevention: 

    1、选择适当底漆系统,并进行小面积试验底漆附着力; 1. Choose suitable primer system and carry out small area test primer adhesion. 

    2、选择适当环氧系统及工艺施作,以增强耐冲击性; 2. Choose suitable epoxy system and process to enhance impact resistance. 

    3、油污面积须先清洗,整理干净后,方可施工; 3, oil contaminated area must be cleaned before finishing. 

    4、地下水压过高,应改用水性底漆或先施作断水层,涂布后隔天再进行下一道工序。 4. If the groundwater pressure is too high, water-borne primer or water-cut layer should be applied first, then the next working procedure should be carried out the next day after coating. 


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 环氧地坪翻新
    无锡环氧地坪 技术支持:【易商科技】