欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 常见问题

    环氧地坪面漆层起气泡的原因及预防方法

    2018-11-06 08:29:58 无锡盛发地坪科技有限公司 阅读

    环氧地坪面漆层,有时候会冒出很多小气泡,当气泡无法突破,停留在环氧地坪漆涂层内时,就会形成突出的气泡,而若气泡花了比较长的时间,超终冒出涂层外,但此时环氧地坪漆涂层已固化到一定程度,气泡形成的小孔无法闭合,环氧地坪针眼问题就出了。下面成都陶氏为您介绍地坪漆气泡问题的原因和预防方法。环氧地坪气泡问题预防方法:

    When the bubbles can not break through and stay in the coating, they will form prominent bubbles. If the bubbles take a long time, they will eventually come out of the coating, but at this time the coating has solidified to a certain extent, and the pores formed by bubbles can not be closed. The problem of epoxy floor needle holes is out. Below, Chengdu Dow introduces the reasons and precautionary measures for the bubble problem of floor paint. Prevention of bubble problem on epoxy floor: 1、对于厚涂型地坪(如环氧自流平地坪),可以在刮完面漆后,用消泡滚筒滚一遍,帮助气泡消平。

    1. For thick-coated floors (e.g. epoxy self-leveling floors), after scraping the finish paint, the defoaming drum can be used once to help defoam the floors.

    2、在施工面漆层时,施工速度不宜太快,回刀时一定要到位;

    2. When the topcoat is constructed, the construction speed should not be too fast.

    2、必须做好基础素地封闭再做面漆层,尤其是水磨石、低强度水泥砂浆等气孔比较多的地面;

    2. We must do a good job of sealing the basic ground and then making the topcoat, especially the ground with more air holes such as terrazzo and low strength cement mortar.



    标签:   地坪 环氧地坪漆 环氧地坪 环氧地坪施工 环氧地坪翻新
    无锡环氧地坪 技术支持:【易商科技】