欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 新闻资讯

    翅片管散热器的生产及选购参数

    2018-11-05 10:21:23 无锡盛发地坪科技有限公司 阅读

    关于生产技术1 :钢制翅片管对流散热器应按批准的产品图样及技术文件制造,并应符合本标准的规定。2 :钢制翅片管对流散热器外罩带后背板、联箱内藏。钢带、外罩板和两端护板应符合有关材料标准的规定,并且应具有材料质量合格证明书。3:钢管椭圆度应不大于0. 3 mm,钢管其他项目应符合GB/T 3092,GB/T 3087,GB/T 8163的规定。4 :钢带与钢管之间应采用高频焊或其他确保紧固的方法。JG/'r 3012. 2一1998

    About production technology 1: Steel finned tube convection radiator shall be manufactured according to approved product drawings and technical documents, and shall comply with the provisions of this standard. 2: steel finned tube convection radiator cover with back plate, joint box inside. The steel strip, cover plate and both ends guard plate shall conform to the relevant material standards and shall have a certificate of material quality. 3: The ovality of steel pipe should not exceed 0.3 mm. Other items of steel pipe should conform to the stipulations of GB/T 3092, GB/T 3087 and GB/T 8163. 4: high frequency welding or other ways to ensure fastening should be adopted between steel strip and steel pipe. JG/'r 3012.2 1 1998

    5 :钢带、钢管的焊接表面应无涂层、铁锈、凹坑等影响焊接质量的缺陷和杂质。

    5: The welding surface of steel strip and steel pipe should be free of defects and impurities such as coating, rust and pits which affect the welding quality.

    6:翅片管质量要求翅片管螺距6-7 mm,翅片高度应大于15 mm,翅片倾伏角不应大于80, 翅片管的直线度每米不应大于1.0 m m. 对于采用高频焊接工艺的翅片管,每米翅片管测量处实际焊缝长度的总和应大于85 ,且未连续焊接长度不应大于50 mm.

    6: Finned tube quality requirements finned tube pitch 6-7 m m, fin height should be greater than 15 m m, fin dip angle should not be greater than 80, finned tube straightness should not be greater than 1.0 M. For finned tube using high-frequency welding process, the total length of the actual weld at the finned tube measurement should be greater than 85, and the length of non-continuous welding should not be greater than 80. More than 50 mm.

    7 :钢制翅片管对流散热器焊接质量要求: 钢管与钢管的对接应符合GB 151的规定。焊接应符合GB/T 985的规定。

    7: Steel finned tube convection radiator welding quality requirements: steel pipe and steel pipe butt should comply with the requirements of GB 151. Welding shall comply with the requirements of GB/T 985.

    8 :钢制翅片管对流散热器在加外罩前应逐组进行水压试验或气压试验,试验压力为工作压力的1.5倍。

    8: Steel finned tube convective radiator shall be tested by water pressure or air pressure one by one before adding cover. The test pressure is 1.5 times of working pressure.

    9 :钢制翅片管对流散热器接管螺纹应符合JG .1 31的规定。

    9: steel finned tube convection radiator pipe thread should comply with the requirements of JG.1 31.

    10 :漆膜质量要求钢制翅片管对流散热器应喷涂防锈底漆和面漆;面板应烤漆,漆膜的制备应符合GB/T 1727的规定。表面涂层应均匀光滑,附着牢固,不得有气泡、堆积、流淌和漏喷。

    10: Coating film quality requirements of steel finned tube convection radiator should be sprayed with anti-rust primer and topcoat; panel should be baked paint, paint film preparation should comply with GB / T 1727 requirements. The surface coating should be uniform and smooth with firm adherent. No bubbles, stacking, flowing and leaky spray should be allowed.

    翅片管

    finned tube

    关于选购

    About buying and buying

    如何选择翅片管散热器确实是消费者需要好好思考的一个问题。

    How to choose finned tube radiator is a problem that consumers need to think about carefully.

    有些注重热效率,关心是否能在短时间内获得明显的效果;有些则因环境因素,侧重是否耐腐蚀;还有在意外形是否美观。如此种种。那么哪些是最基本的、不可忽视的呢?

    Some pay attention to thermal efficiency, concerned about whether in a short period of time to achieve significant results; some are due to environmental factors, focusing on whether corrosion resistance; and whether the unexpected appearance is beautiful. So many. So what are the most basic and important things to ignore?

    第一:翅片管散热器的工作压力,应满足系统的工作压力,并符合国家现行有关产品标准的规定;

    Firstly, the working pressure of finned tube radiator should satisfy the working pressure of the system, and conform to the relevant national product standards.

    第二:放散粉尘或防尘要求较高的工业建筑,应采用易于清扫的翅片管散热器;

    Secondly, finned tube radiators should be used in industrial buildings where dust emission or dust prevention is required.

    第三:具有腐蚀性气体的工业建筑或相对湿度较大的使用环境下,应采用耐腐蚀的翅片管散热器;

    Thirdly, corrosion-resistant finned tube radiators should be used in industrial buildings with corrosive gases or in high relative humidity environment.

    第四:采用钢制翅片管散热器时,应采用闭式系统,并满足产品对水质的要求

    Fourth: the use of steel finned tube radiator, should be closed system, and meet the product requirements for water quality

    第五:采用铝制翅片管散热器时,应选用内防腐型铝制翅片管散热器,并满足产品对水质的要求;

    Fifth: the use of aluminum finned tube radiator, should choose internal corrosion-resistant aluminum finned tube radiator, and meet the product requirements for water quality;

    第六:选择正规的翅片管散热器生产厂家,具有更好的售后指导安装,技术支持,我公司专业制造各类散热器设备、换热器、油冷却器、表面空气冷却器、暖气片、翅片管,产品通过上海同济大学,中国纺织大学检测,达到先进水平, 欢迎新老客户来电咨询,询盘,我们真诚与您合作!

    Sixth: Select the regular finned tube radiator manufacturer, with better after-sales guidance installation, technical support, our company specializes in manufacturing all kinds of radiator equipment, heat exchangers, oil coolers, surface air coolers, heating fins, finned tubes, products through Shanghai Tongji University, China Textile University testing, to achieve advanced water Ping, welcome new and old customers to inquire, inquiry, we sincerely cooperate with you!辛苦整理.转载请注明http://www.wxsxsjx.com


    标签:   翅片管 环氧地坪漆 环氧地坪 环氧地坪施工 地坪
    无锡环氧地坪 技术支持:【易商科技】