The first aspect is the selection of epoxy floor paint varieties. They are all set up according to different construction environments and have strong pertinence, such as anti-skid, wear resistance and so on. Epoxy floor paint is rich in color, bright and full, not easy to change color. You can also consider the purchase of epoxy floor paint with this characteristic. There is no project that does not want to be constructed simply. The ordinary cement floor is smeared several times and can be used within a few days after the completion of the construction. On the basis of cement ground, the use of floor materials can enhance the adhesion and wear resistance of cement ground, make the ground more solid and have better effect. Good chemical resistance is required. The type, concentration and contact time of the chemical medium will be contacted during the use. The condition of the substrate determines the appearance of the evenness, the thicker the floor coating is, the better the flatness is. According to the construction environment and requirements, choose the appropriate floor paint, such as: parking lot construction, choose epoxy floor paint with anti-skid performance. Generally, the self leveling floor is selected for the sites with clean requirements, and the thickness of the paint can ensure the quality of the construction. The epoxy flooring is subject to vehicle running in the use process, and its impact performance and the degree of wear and tear should be considered.
Second aspects: construction experience. The construction of epoxy floor paint in the construction industry is indispensable to the application of the two major factors, namely, the concrete and the old ground. Improper handling will affect the progress and effect of construction. Therefore, before the construction of floor paint, two things must be done: before the construction, we should check the old ground that has been used, whether there is damage or not, and if so, we should repair it in time. Remove wax layer, oil contamination, chemical corrosion medium and old coating. Concrete is mainly composed of cement, sand, stone, mortar and so on. It has high water absorption, strong alkalinity and slow drying. Surface pan-alkali and water absorption of newly poured concrete are the key factors affecting the quality of coating. Therefore, before coating, surface pan-alkali should be thoroughly removed and neutralized when necessary, so as to smooth the project.
标签:   地坪 环氧地坪漆 环氧地坪 环氧地坪施工