The old epoxy floor damage will affect its protection to the ground, easy to start ash and sand. Dust into the machinery will cause damage to the machinery, so it is necessary to renovate the old floor at this time. The following is an introduction to the renovation plan for epoxy floor. 1. Remove the old epoxy floor. For the old epoxy flooring, professional epoxy grinding equipment should be used to remove it completely. This first step is unified, and then construction is carried out according to different types of epoxy flooring. 2、清除油垢。如果地面有油污，要先将其清楚，再根据实际情况进行脱脂、脱油，确定表面干净后方可施工。
2, remove grease stain. If there is oil pollution on the ground, it should be clear first, then degrease and degrease according to the actual situation, and make sure that the surface is clean before construction.
3, crack treatment. Poor material and construction quality often lead to ground cracks. If cracks are found, a cutting machine can be used to cut the cracks into V-shaped grooves and then pour epoxy mortar into them to make them flat.
4, pothole processing. Ground holes will make it difficult to leveling the ground. It is suggested to use a grinder to grind the hollow areas of the ground, and then use mortar or cement to treat the holes.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 环氧地坪翻新