We all use industrial epoxy flooring in industrial and commercial places because of the need to enhance the wear resistance of concrete flooring. This not only improves the density of the concrete surface, reduces dust, increases the oil resistance of the city surface, and forms a high density, easy to clean and anti-permeability ground. And with the concrete floor construction, construction period is short. Low cost and good durability, reduce the cost of periodic coating or surface thickening, which is why we choose epoxy flooring. 表面性能：
1. When the ambient temperature is 25 C, the hardness should reach about 80% of the solidification after 2-3 days of construction.
2, the surface can not appear sticky phenomenon;
3, bubble: flat coated, mortar type no bubbles, self leveling allows 1 small bubbles /10 square meters;
4, good leveling, no trowel marks, large area of the interface is basically smooth.
5, no floating color and flower, uniform color, large area interface allows very insignificant chromatic aberration;
6, there is no coarse impurity, but it allows the floating dust in the air to drop into the minimal defect.
7. The surface of the floor should be smooth and smooth, and the glossiness should meet the design requirements (high gloss (> 90), gloss (> 70), half gloss (> 50-70). The flat coating type should be glossy and water-based should be half glossy (~dull).
8, orange peel and mortar anti slip surface effect should be very obvious.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工