During the construction of epoxy flooring, there will be some problems due to man-made reasons. I don't know if you have ever seen "sweating" of epoxy flooring. Generally, this phenomenon usually occurs after the ground is polished. Sometimes we will find that the ground is bright or has water droplets. In fact, this phenomenon is the "emergence" of epoxy flooring. Sweat, but not every kind of floor will appear this phenomenon, mainly some oily surface, in fact, the floor will "sweat" is caused by many reasons, such as the base treatment is not thorough, resulting in oil or water infiltration into the surface of the floor and so on.
There are many reasons for sweating of epoxy floor. There are basically three reasons:
1, the floor paint film is not completely dry to polish.
2. Non solvent plasticizers such as castor oil and camphor were selected. Generally occurs in nitrocellulose lacquer.
3, paint film contains wax, mineral oil and other oils.
In response to such problems, we propose countermeasures:
1. Grinding floor must be thoroughly dried after coating.
2. Plasticizer is the best solvent type.
3, try to use less oil rich additives, or find other alternatives.
So, we must not relax our vigilance during construction. Every step of construction should be taken seriously. We should also pay attention to material selection, and the construction method should not be half understood.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工