Nowadays, epoxy floors can be seen in many places, and there are many kinds of floors. Different kinds of floors can be selected according to different locations and requirements. Among the many types of flooring, the most widely used type is epoxy floor. This is mainly because many advantages of epoxy floor can meet the needs of users, but in fact, the epoxy floor has its own limitations, in addition, if not strictly in accordance with the regulations in the construction process, it will lead to problems of epoxy floor. The following will briefly introduce how to avoid pinholes in epoxy flooring and how to avoid damp phenomena.
In the long-term use of epoxy flooring, how to prevent pinholes from construction? The main reason that may cause pinholes is construction. When the epoxy floor is constructed, the viscosity is too high and the ambient temperature is too low. If it is not maintained for a proper time after mixing, the bubble will remain. Therefore, to maintain suitable construction viscosity and construction temperature, the bubbles will not be constructed again. In addition, there is another reason that the improper preparation of solvents, low boiling point volatility more results in the bottom of the solvent is not easy to escape. It can reasonably control the capacity of low boiling point solvent. Ensure that there is no moisture and air in the coating during construction.
If the construction operation is not carried out scientifically according to the integral continuity of the waterproof layer, the wetness of the later floor will be caused. Only by scientific operation can the construction effect of epoxy floor be guaranteed. There is much more information about epoxy flooring. If you are interested, you want to know more about it. On the one hand, you can call our hotline for consultation, or you can visit our website for consultation. Either way, we will try our best to meet your needs.
标签:   地坪 环氧地坪漆 环氧地坪 环氧地坪施工