欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 常见问题

    环氧耐磨地坪厂家告诉你如何避免表面粗糙

    2018-11-03 12:37:22 无锡盛发地坪科技有限公司 阅读

    环氧地坪虽然在现在比较常见的一种环氧地坪类型,但是环氧地坪在施工过程中也会由于各种问题,无法达到预想的效果,而常见的状况就是环氧地坪表面粗糙, 针对于这种情况应该怎样处理呢,在处理之前要分析一下原因,再根据原因找出相应的解决办法。 耐磨地坪漆出现表面粗糙的现象主要以下四点:

    Although the epoxy wear-resistant floor is a common type of floor now, the epoxy wear-resistant floor can not achieve the desired effect due to various problems in the construction process, and the common situation is that the surface of the epoxy wear-resistant floor is rough. In view of this situation, how to deal with it? Before dealing with it, we need to analyze one. Next, find out the corresponding solutions based on the reasons. The surface roughness of wear-resistant floor paint is mainly the following four points:

    1、因为施工环境不干净,有较多的灰尘,灰尘黏在涂膜上就会出现粗糙;

    1, because the construction environment is not clean, there are more dust, dust will stick on the film will be rough.

    2、调配好的耐磨地坪漆材料没有经过过滤就直接使用了,使杂质混入里面,当涂膜干燥之后就会在环氧地坪上显示出来;

    2. The prepared abrasion-resistant floor paint material is directly used without filtering, so that impurities are mixed into it. When the film is dried, it will be displayed on the epoxy floor.

    3、耐磨地坪漆已经开始固化,仍然继续施工,因为耐磨环氧地坪漆都是双组分的,加入固化剂之后就会产生化学反应,然后固化成膜,如果已经开始固化,仍会施工完成,那就会导致粗糙;

    3. The wear-resistant floor paint has begun to solidify, but still continues to be constructed, because the wear-resistant floor paint is two-component, after adding curing agent, it will produce chemical reaction, and then solidify into film. If it has started solidification, it will still be completed, which will lead to roughness.

    4、施工现场的温度太高,使得稀释剂挥发速度快,耐磨地坪漆还没有流平就已经固化。

    4. The construction site temperature is too high, which makes the diluent volatilize quickly, and the wear-resistant floor paint has solidified before leveling.

    相应的解决办法有,在施工耐磨地坪漆之前一定要将基面及现场清扫干净,将耐磨地坪漆材料用过滤网过滤之后再施工。施工前要根据施工时间计算材料的用量,再严格按照涂料配比进行调配。不能多配,使用的稀释剂需要慢干的高飞点的。处理好下层,从底层开始就要按施工要求做好,中层要杜绝粗糙现象,面层施工前一定要把中层清理干净,确认无灰尘后再施工,这样就可以解决耐磨地坪漆该类的粗糙现象了。

    Corresponding solutions are: before the construction of wear-resistant floor paint, it is necessary to clean the base surface and the site, and filter the wear-resistant floor paint material with a filter before construction. Before construction, the amount of material should be calculated according to the construction time, and then strictly allocated according to the proportion of the paint. It can't match well. Thinners need slow dry high flying points. To deal with the lower layer well, we should do a good job according to the construction requirements from the bottom layer. The middle layer should eliminate the rough phenomenon. Before the surface layer construction, we must clean the middle layer, confirm that there is no dust before construction, so that we can solve this kind of rough phenomenon of wear-resistant floor paint. 


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】