Because of the improper installation and use of epoxy flooring, some problems will inevitably arise. After that, we should find out the causes of the problems and find ways to solve them. Some problems that may arise in today's epoxy flooring manufacturer are listed. Some reasons and solutions, I hope to help you.
1) the humidity of the structure, underground water tank, bottom floor or other floor is high.
2) no water treatment or poor sealing of primers.
1) assist in the determination of water content before construction.
2) where water and water pressure are too high, water treatment should be done first.
3) choose a hydrophilic epoxy primer.
(two) chromatic aberration
1) the main agent of epoxy resin is precipitated and not fully stirred evenly.
2) the contact time on the ground and the front seams is too long.
3) uneven coating thickness.
4) the construction is cut off halfway.
5) use different batch topcoat.
1) the main agent should be fully stirred before construction.
2) avoid contact with the front seams for a long time, and construct the whole operation line as far as possible.
3) try to use fixed tools and enhance the proficiency of construction personnel.
4) the paint must be sufficient at one time to prevent material breaking.
5) use the same batch of paint as much as possible.
So in the construction process we need to master certain skills, of course, in the use process also need to pay attention to some aspects, in order to avoid damage to the floor, in addition, you must choose a professional construction company, quality assured floor paint, to avoid problems later.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工