Environmental requirements for epoxy floor paint construction: base surface moisture content: non-water-based epoxy floor can not be constructed when more than 6%; humidity in air: construction should be stopped when more than 85%; construction temperature: special formula should be selected when less than 5 C. Maintenance and maintenance of epoxy floor paint is a high-value, high-quality and high-demand product, which requires careful maintenance and maintenance. Correct use method can keep the floor fresh and extend the service life. People who enter the workshop need to change shoes (in order to avoid bringing mud and sand into the workshop and scratching the floor); all hardware and software are needed. It is necessary to wrap its feet with soft plastic or rubber so as not to scratch the ground in the course of use; pull the stack board up from the ground sufficiently; when turning, pay special attention to the corner of the stack board and not scratch the ground; when cleaning the ground, use a soft mop or a dry-wet dual-purpose vacuum cleaner, clean it with clean water or detergent, but pay attention to the wetness of the ground. Slip; If wear or scratch occurs due to long use time, small area can be repaired locally. If the area is large, it is recommended to re-roll or upsetting once. The wheels of trolley and trolley should be made of rigid or elastic rubber wheels and used separately inside and outside the workshop. Floor in use also requires us to master a lot of knowledge, so today our epoxy flooring manufacturer for you to simply share some of the knowledge that the floor needs to master in maintenance.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工