With the development of the times, more and more factories, workshops, parking lots and so on begin to pay attention to the cleaning and maintenance of the ground. We all know that the dust of the general cement floor is relatively large when it is cleaned. Slowly, the concrete sealing and curing agent floor is familiar with its advantages of dust prevention, compression and wear resistance, and is widely used. Over time, some problems arise in the use process. In fact, the so-called problems are actually some details that we need to pay attention to in the use process. The epoxy flooring manufacturer Xiaobian gives you a detailed introduction about some details that we often neglect in the use of concrete sealant and curing agent flooring. Come and get to know!
Matters needing attention in concrete sealing agent
1, the old ground should first remove the surface coating (such as wax layer, curing agent, resin coating, etc.) and oil pollution. This product is not applicable to heavy oil contaminated ground.
2. Construction temperature: 2 C < surface temperature <50 C
3. The plastic barrel is sealed and stored at above 0 C. The storage period is unlimited. If there is turbidity, shake well before use.
4, check whether the package is complete and sealed during transportation, and rinse with plenty of water when leaking.
5, if misunderstood, please drink a lot of warm water immediately to urge vomiting and seek medical advice. Skin contact or splash into the eyes immediately, rinse with water or seek medical advice. Avoid child contact.
These are some details that are easily overlooked when we use concrete sealant and curing agent on the floor. Did you get shot? Nowadays, the state has always advocated hygiene and environmental protection. Whether the ground is clean or not is one of the criteria to measure the image of an enterprise. It pays attention to details and correctly uses the concrete sealant and curing agent floor.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 混凝土密封固化剂