It is estimated that everyone is unfamiliar with the concrete sealing and curing agent, but when it comes to its application, such as large factories, some production workshops, supermarkets, exhibition centers, airports, underground garages, hospitals, etc., it must be suddenly realized that this is the concrete sealing and curing agent. Because the concrete sealant is suitable for some special occasions, such as airports, hospitals and so on, if its quality does not meet the standard, the risk factor is still very high. Then, what kind of concrete sealing curing agent is qualified for its quality standard of concrete sealing curing agent, epoxy floor manufacturer related personnel said that in fact the quality standard of concrete sealing curing agent should have the following characteristics!
The improvement of the glossiness of the ground by the concrete sealing and curing agent is mainly reflected in the fact that after filling the pore of the concrete, the diffuse reflection of the original light is more transformed into mirror reflection, so as to increase the glossiness to a certain extent. For higher gloss, mechanical polishing is required for mirror effect. This is mainly determined by the requirements of customers, and there is no uniform standard.
Dust prevention is the lowest standard for concrete sealant floors, which is applicable to all floors constructed with concrete sealant.
The optimum strength of concrete sealant curing agent floor can reach 8 - 9 degree of Mohr hardness, but not all of the floor after construction are based on this acceptance standard. Generally speaking, the strength of the ground after construction should be greatly improved compared with the original ground. The lowest standard is that no dust or sand will be raised and no scratches will be made when scratched by non-sharp metal objects.
4. Skid resistance
No matter it is high gloss or matte concrete sealant curing agent floor can not slip, otherwise there is suspicion of waxing in the construction process, unless Party A permits, otherwise it belongs to Jerry work and material reduction.
Tightness is mainly reflected in resistance to pollutants such as stains, water and oil. Normal concrete sealant curing agent floor can effectively prevent the invasion of pollutants, but not absolutely. The anti-fouling performance of the floor after construction should be better than that of the original floor, which contains two parameters: the permeability time and the permeability.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 混凝土密封固化剂