In recent years, because the haze has caused great environmental pressure on a large scale of the country, the country is paying more and more attention to environmental protection, especially the recent environmental storm is coming back, environmental protection has become a topic of great concern to us, various enterprises have contracted the main force of environmental protection. Next, we will take the concrete sealant curing agent as an example to give you a detailed explanation, see if the concrete sealant curing agent you are using meets the current environmental requirements, let's take a look at it together.
1. no dust is permanent.
This product reacts with silicate in concrete to permanently remove concrete particles released from surface voids, thus preventing ash from rising.
2. improve strength and hardness permanently.
It can solidify the composition of concrete into a hard entity and form a three-dimensional space network structure, thus increasing the density, strength and hardness of concrete, and greatly improving the anti-wear ability and surface weatherability of concrete. The smooth surface of the light will produce a beautiful luster like marble. The Concrete Treated by this product has a strength increase of more than 40% after 30 days of compression test, and the strength increases continuously with time.
3. permanent sealing and impermeability
Only once in use, concrete and curing function and permanently sealed in the life cycle, and can resist any oil and other dirt.
4. permanent curing concrete
The new concrete surface can inhibit the production of fine cracks and temperature cracks. When the construction is applied to the rigid concrete which has been properly poured and just completed, the substances generated by chemical reaction with concrete components will retain the water which is very important in the hydration process, and conserve the concrete consistently.
5. super binding ability
Due to the elimination of concrete salts with unfavorable surface bonding, the treated surface is more conducive to the use of paint, waterproof materials, binders and floor materials, and the combination and compatibility with any kind of coating materials.
6. save a lot of maintenance and maintenance costs.
No wax is needed, only water is needed to mop the floor.
1. The first step of construction of concrete sealing and curing agent is to grind the concrete base surface. Grinding is an important factor to determine the quality of floor engineering. The purpose is to open the capillary holes of concrete and make the concrete sealing and curing agent infiltrate into the interior of the ground smoothly.
2. Clean up the surface of the grass-roots, remove floating ash, oil pollution and other unfavorable substances, if there are too many pits for the old grass-roots, it needs to be repaired in advance.
3. Pour the high permeability sealant evenly on the ground, flow freely and permeate. At the same time, wipe lightly to make the whole ground permeate evenly. When the base surface permeate reaction becomes slippery and thick, wet the sticky surface with water mist, make the high permeability sealant continue to permeate.
4. Observe the compactness and permeability of the base surface and apply the high permeability sealant to the ground three times or more.
5. When the permeation reaction of the base surface is complete (the surface water is not completely dry is better), use professional ground cleaning machine to clean the surface and remove excess materials.
6. After 2-4 hours of completion, the soft wool polishing pad is used to polish the surface of the floor. Resin polishing pad is used to polish the base surface for many times. The longer the use time, the better the gloss.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 混凝土密封固化剂