With the development of the times, all things in the world are constantly developing in the process of change and renewal. People will grow old and trees will wither, let alone the epoxy floor that we use everyday. Because of its excellent performance, epoxy flooring is widely used in various industries, especially in factories, garages and other industries, so after several years of use, there will inevitably be a variety of problems, such as cracks, bubbles, scratches and so on. Once this problem occurs, the color value of epoxy flooring will be greatly reduced, at the same time in a certain extent. To a certain extent, it will also restrict the development of the company. Therefore, the reproduction of epoxy flooring color has become a concern and concern of various enterprises. 如何让环氧环氧地坪颜值再现呢，重新铺设，耗资大不说还影响企业的工作效率，在经济可控还不影响工作效率的情况下，各个企业纷纷采用环氧地坪翻新让环氧地坪颜值再现，那环氧地坪的翻新流程都有哪些呢？
How to make the epoxy flooring color reproduction, re-laying, not to mention the cost, but also affect the work efficiency of enterprises, in the case of economic controllability does not affect the work efficiency, various enterprises have adopted the floor renovation to make the epoxy flooring color reproduction, then what are the renovation processes of the epoxy flooring?
1. Remove old floors.
First, the first step, Xin and Yan Li Xiaobian suggested that the construction team should clear the damaged floor. These damaged floors should be completely polished with machinery and equipment, and after polishing the damaged parts, oil dirt and grease should be removed. Because if it is not cleaned up, it can not be constructed upwards, which will easily lead to poor repair of the original cracks. Causing greater losses. So we must plan carefully every step.
2. Remove grease stains and grease stains.
If there is oil contamination on the ground, remove the grease stains. Luoyang Xin and Yan Li Xiaobian suggest that the constructors can degrease and degrease 2 to 5 times continuously according to the actual situation. After the surface is clean, new floor construction will be carried out.
3, crack treatment
Cracks often occur because of poor construction technology or material problems. When cracks are found in the old floor, cracks should be treated first. The cracks in the base can be cut out of V-grooves by cutting machine, and then the debris in the V-grooves can be cleaned up, and special epoxy mortar material can be poured in to make it and the V-grooves. The substrate is smooth.
4. Pit handling
The pit will seriously affect the leveling of the ground, so it is suggested that the ground should be polished with a grinder first, then the empty drum of the floor should be knocked out or eradicated, and the pit should be repaired with high strength cement or mortar.
5, redo the surface coating.
Finish all the basic ground treatment, and then do 1 - 2 times of epoxy flooring finish, the flooring will be color reproduction!
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 环氧地坪翻新