欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    环氧地坪大讲堂之环氧彩砂地坪施工之验收篇

    2018-11-02 07:06:03 无锡盛发地坪科技有限公司 阅读

    我们已经在前几期大讲堂详细介绍过环氧彩砂环氧地坪概念、施工工艺等,和其他环氧地坪区别较大,怎么验收呢?我们在这里重点讲解!环氧彩砂地坪验收的标准是什么?在没有国标和行标时,环氧地坪施工商应在签订合同时和业主进行协商和确定,并写进合同,以免事后产生不必要的麻烦。

    We have introduced the concept and construction technology of epoxy coloured sand floor in detail in previous lectures. It is quite different from other floors. How to check and accept it? Let's focus on this. What is the acceptance standard of epoxy resin sand flooring? In the absence of national standards and benchmarks, epoxy floor builders should negotiate and confirm with the owners when signing the contract, and write it into the contract, so as to avoid unnecessary trouble afterwards. 这里提供一个较为可行的环氧地坪验收标准作为参考,具体如下:

    A more feasible acceptance criteria for epoxy floor is provided as a reference.

    1.以乙方提供的、甲方确定的样板质量为验收标准。

    1. the sample quality provided by Party B and Party A shall be the acceptance standard.

    2.完工地坪产品表观:颜色均匀,无色差;表面洁净,光泽明亮。外观平整度检验:参照GB50209-95验收标准,用2m直尺检查,其允许空隙为3mm。

    2. finished floor products appearance: uniform color, no color difference; clean surface, bright luster. Appearance smoothness test: According to GB50209-95 acceptance standard, check with 2m ruler, the allowable gap is 3mm.

    3.产品地面不出现气泡、开裂、空鼓、剥落、起皮等现象。

    3. there are no bubbles, cracks, hollowing, peeling and peeling on the surface of the products.


    环氧地坪

    环氧地坪


    环氧彩砂地坪怎样验收?

    How to check the floor of epoxy resin sand?

    1.通常在室温条件下,彩砂环氧地坪完工24小时后可行走,但需5-7天才可完全固化。因此,严格地应在地面完工6~7天后方可正常(荷重)使用。

    1. Usually at room temperature, the coloured sand epoxy floor can walk after 24 hours, but it takes 5-7 days to solidify completely. Therefore, only after 6~7 days of completion on the ground can normal load be used.

    2.彩砂环氧地坪施工完毕后,由业主、监理和承包商、施工商双方共同检查验收。根据确定的产品验收标准检查验收。

    2. After the construction of coloured sand epoxy flooring is completed, the owners, supervisors, contractors and builders shall jointly inspect and accept it. Check and accept according to the standard of product acceptance.

    产品外观检测: 用目测法,检查颜色是否符合设计要求?表面是否平整密实、有无裂缝?罩面涂层是否均匀一致、是否有气泡、起皮或鼓包等现象?

    Product appearance inspection: visual inspection is used to check whether the color meets the design requirements. Is the surface smooth and dense with cracks? Is the coating uniform, bubble, peeling or bulging?

    产品基层牢固度检测:用敲击法,检查环氧彩砂与基层的粘接是否牢固?有无空鼓产生?有无脱层现象?

    Product base fastness detection: using the percussion method to check whether the bonding between epoxy resin sand and the base is firm? Is there any hollowing out? Is there any delamination phenomenon?

    验收合格后,签字确认将完工的合格地面移交甲方。

    After acceptance, the signatures confirm that the completed qualified ground will be transferred to Party A.

    这里展示一下环氧彩砂圆弧踢脚和工具,如下图:

    Here is a demonstration of the epoxy resin sand arc skirting feet and tools.


    环氧地坪

    警告:如果选用环氧树脂是溶剂型,则可能出现不能跟固化剂完全反应。该彩砂受到重力压扯容易压损剥落;并且固化反应不完全,存留在彩砂层内无法挥发或挥发不均匀的溶剂也会导致整个彩砂地坪黄变不均,影响美观和品质。

    Warning: if epoxy resin is chosen as solvent, it may not be able to react with curing agent completely. The color sand is easily fractured and peeled by gravity pressure, and the solidification reaction is incomplete, and the solvents that remain in the color sand layer can not volatilize or volatilize unevenly will also cause uneven yellowing of the whole color sand floor, affecting the beauty and quality.



    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 环氧彩砂地坪
    无锡环氧地坪 技术支持:【易商科技】