欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 环氧地坪

    工业厂房中的环氧地坪的保养大全

    2018-11-02 07:02:14 无锡盛发地坪科技有限公司 阅读

    环氧地坪是一种高强度美观洁净的地面,不仅拥有较高的附着力和负载性,并兼具强韧耐磨、平整光洁及成本经济等优点,受到许多厂商的青睐。几乎所有的现代化工厂都会选择不同的环氧地坪涂装系统以适应其不同的环境需要。根据用途要求有多种环氧地坪系统,如电子厂房常用的环氧防静电地坪,食品厂常用聚氨酯砂浆地坪,烟厂常用环氧彩砂地坪等。但是长时间的负重载多少会对环氧地坪造成一定的损害,正确的使用方法和维护保养可使地面常保如新,并且可以保长使用年限。那么,如何保养和维护环氧地坪呢?

    Epoxy floor is a kind of high strength, beautiful and clean ground. It not only has high adhesion and load, but also has the advantages of toughness, wear resistance, smoothness, cleanliness and cost-effectiveness. It is favored by many manufacturers. Almost all modern chemical plants will choose different floor painting systems to meet their different environmental needs. According to the application requirements, there are many kinds of floor systems, such as epoxy anti-static floor commonly used in electronic factory, polyurethane mortar floor commonly used in food factory, and epoxy coloured sand floor commonly used in tobacco factory. However, long-term load-bearing will do some damage to the epoxy floor. Correct use and maintenance can keep the ground fresh and prolong the service life. Then, how to maintain and maintain the epoxy floor? 

    环氧地坪漆厂家给您提出在使用环氧地坪的具体建议:

    The epoxy floor paint manufacturer gives you specific suggestions on the use of epoxy floor.

    环氧地坪

    1、新建环氧地坪施工完毕后,在保养期内切勿使用,养护5-7天,避免其他液体浸润表面,并须加强通风设备及防火措施;

    1. After the completion of the construction of the new epoxy floor, do not use it during the maintenance period. Maintain for 5-7 days to avoid other liquid infiltration on the surface, and strengthen ventilation equipment and fire prevention measures.


    2、环氧地坪使用,生产人员不准穿有铁钉的皮鞋在上面行走,建议现场人员换成橡胶底鞋或者洁净鞋;一切工作器具都须有固定专用车架安放,严禁带有锐角的金属零件等物件碰撞地面,造成地面涂层损坏。

    2. When using epoxy flooring, production personnel are not allowed to walk on it with nailed leather shoes. It is suggested that field personnel should replace rubber soles or clean shoes; all working instruments should be installed with fixed special frame, and metal parts with sharp angles should be strictly forbidden to collide with the ground, causing damage to the ground coating.


    3、生产车间厂房内现场安装设备时,在接触环氧地面的支撑点应有厚橡皮等软件材料垫妥,严禁用铁管等金属在环氧地面上接拖设备;叉车、铲车卸货时注意货物平放,避免货物侧侄、拖、拽刮伤环氧地面,各车辆在运行时尽量避免刹车,在环氧上急刹车很容易产生胎痕,而且还清理不掉。

    3. When installing equipment on site in workshop workshop, the support points of contacting epoxy ground should be padded with thick rubber and other software materials, and it is strictly forbidden to use metal pipes to connect and tow equipment on epoxy ground. Forklift truck and forklift truck should pay attention to placing cargo when unloading, so as to avoid cargo side nephew, towing and scratching epoxy ground, and all vehicles run out. Avoid braking. Brake on epoxy is easy to produce tyre marks, and it can not be cleaned up.


    环氧地坪

    4、生产车间厂房内环氧地坪有损坏,及时使用环氧地坪漆修补,以免油污通过损坏处渗透到水泥里,造成大面积涂料脱落。

    4. If the epoxy floor is damaged in the workshop, the epoxy floor paint should be used to repair it in time so as to prevent oil pollution from penetrating into the cement through the damaged area and causing a large area of paint to fall off.


    5、现场内大面积清洗环氧地面时,不要用强化学溶剂,一般使用洗涤剂、肥皂液、清水等,用清洗机进行,或者打蜡也可以。

    5. When cleaning the epoxy floor in large area on site, do not use reinforcement chemical solvent. Usually use detergent, soap solution, water, etc. It can be carried out by washing machine or waxing.



    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】