欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 环氧地坪

    厂家告诉你旧环氧地坪为何需要翻新?

    2018-11-02 06:37:33 无锡盛发地坪科技有限公司 阅读

    工业领域环氧地坪使用了5-15年会出现失光变旧、出现裂纹、空鼓、起砂起皮、划痕等等;环氧地坪的重塑“青春”也就成了各领域比较关注的问题。为何旧环氧地坪翻新呢?1.洁净车间要求符合GMP标准,洁净度的要求较高,环氧地坪旧了就必须翻新。

    In the industrial field, epoxy flooring has been used for 5-15 years, and there will be light loss, aging, cracks, empty drum, sand and peeling, scratches and so on. The reconstruction of "youth" of epoxy flooring has become a more concerned issue in various fields. Why is the old epoxy floor refurbished? 

    1. Clean workshop requirements meet GMP standards, cleanliness requirements are higher, the old epoxy floor must be renovated.

    2.生产车间专配的机械设备比较精密,车间环氧地坪变旧容易起砂起尘,极易对设备造成损伤;最后导致耽误生产、延误订单又要花去公司很多经费来维修机械设备,给公司造成非常大的损失;

    2. Specialized machinery and equipment of production workshop are more precise, the floor of workshop becomes old and easy to sand and dust, which is very easy to cause damage to equipment; finally, delaying production and delaying orders will cost the company a lot of money to repair machinery and equipment, which will cause great losses to the company.

    3.电子车间加工生产的是精密电子元器件,对地面的洁净度要求也较高,一旦旧环氧地坪起砂起尘等就会使产品质量造成影响,同时也会给公司带来经济损失及公司形式破坏;

    3. Precision electronic components are processed and produced in the electronic workshop, which requires high cleanliness of the ground. Once the old epoxy floor is sanded and dusted, the product quality will be affected. At the same time, it will bring economic losses and damage to the form of the company.

    4.环氧环氧地坪破旧后,若不及时翻新处理,公司相关认证(如:iso9001、iso14000等)无法通过;

    4. After the epoxy floor is worn out, if it is not renovated in time, the relevant certification of the company (e.g. iso9001, iso14000, etc.) can not pass.

    旧环氧地坪怎么去翻新?

    How can the old epoxy floor be renovated?

    方案一:对地面要求承重载、耐冲击的机械加工车间;对旧地面铣刨,再施工环氧砂浆或者环氧彩砂地坪。翻新后能承受重压,耐磨、耐冲击、经久耐用、防尘、易清洁。

    Scheme 1: Mechanical processing workshop with load-bearing and impact-resistant requirements for the ground; milling of the old ground, and then construction of epoxy mortar or epoxy coloured sand floor. After refurbishing, it can withstand heavy pressure, wear resistance, impact resistance, durable, dust-proof and easy to clean.

    方案二:对地面的洁净度及美观度要求较高;对旧地坪进行打磨、清理、修补,再施工环氧自流平地坪。翻新后表面光洁、美观、易清洁,耐酸、碱、盐、油类腐蚀,特别是耐强碱性能好、洁净。

    Scheme 2: The cleanliness and aesthetics of the ground are required to be high; the old ground is polished, cleaned and repaired, and then the epoxy self-leveling ground is constructed. After renovation, the surface is smooth, beautiful, easy to clean, acid, alkali, salt, oil corrosion resistance, especially strong alkali resistance, good and clean.

    方案三:塑立得专属旧地面翻新系统;对旧环氧地坪、无机地坪等打磨清理、修补、吸尘。直接涂刷塑立得防护面涂施工。翻新后增加了环氧地坪使用年限,耐磨耐划痕等性能增强,施工简便、功能性提升非常明显。塑立得产品是旧环氧地坪翻新的不二的选择。

    Scheme 3: The old ground renovation system is exclusive to Plastic Ride; the old epoxy floor and inorganic floor are polished, cleaned, repaired and cleaned. The construction of the protective coating is directly coated with plastic. After renovation, the service life of epoxy floor is increased, the wear resistance, scratch resistance and other properties are enhanced, and the construction is simple and the functional improvement is obvious. Plastic products are the best choice for renovation of old epoxy floor.



    标签:  打破了 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】