抛光混凝土环氧地坪正迅速成为人们最喜欢的环氧地坪之一。抛光混凝土地面，是指混凝土通过研磨工具逐步打磨并经与化学硬化剂共同作用后所形成的混凝土表面。 施工者使用化学硬化剂渗透自然浇筑的混凝土，使其表面强度和致密度得到强化，并通过机械打磨和抛光提高其平整度和反光度，从而使混凝土地坪兼备使用性能和特殊的装饰效果。这就是为什么大多数零售，仓库和办公室选择抛光混凝土地坪的原因。 下面就给大家分享下抛光混凝土地坪的抛光工艺：粗磨处理 这个过程从使用在金属基体中粘合的粗金树磨片开始。这部分足够粗糙，可以去除地坪上的小凹坑、污点、污迹或浅色涂层，最终形成平滑的表面。 根据混凝土的状况，这种初始的粗磨通常需要三到四步的研磨过程 细磨处理 这个过程是使用镶嵌在塑料或树脂基质中的树脂磨片对混凝土表面进行细磨。施工人员使使用越来越细的抛光盘进行研磨，直到地坪达到所需的光泽。对于非常高的光泽度，最后可以使用1500目或更细的磨片。
The polished concrete floor is rapidly becoming one of the most popular floors. Polished concrete ground refers to the concrete surface formed by grinding tools and chemical hardening agents. The builder uses chemical hardening agent to penetrate the naturally poured concrete, which strengthens its surface strength and density, and improves its smoothness and reflectivity through mechanical polishing and polishing, so that the concrete floor has both performance and special decorative effect. That's why most retailers, warehouses and offices choose to polish concrete floors. Here's how to polish concrete floors: Coarse grinding starts with the use of coarse gold tree sharpeners bonded to metal substrates. This part is rough enough to remove small pits, stains, stains, or light-colored coatings from the floor and eventually form a smooth surface. Depending on the condition of the concrete, this initial coarse grinding usually requires a three to four-step grinding process, in which the surface of the concrete is finely ground using resin Abrasives embedded in a plastic or resin matrix. The builders used the polishing discs to polish them until the floor needed luster. For very high gloss, you can use 1500 or more fine grinding discs.
Experienced polishers know when to switch to the next finer eye by looking at the surface of the floor and the amount of material removed. During polishing process, internal impregnating sealant is used. Sealant infiltrated into concrete is almost invisible to the naked eye. It not only protects concrete from inside to outside, but also hardens concrete and increases density. This eliminates the need for partial coating and greatly reduces maintenance. If the polishing agent is laid on the surface in the final polishing stage, the floor will be brighter. These polishers also help to remove residues on the surface during polishing, forming a contaminated surface. You can wet or dry concrete. Although each method has its advantages, dry polishing is the most commonly used method in the industry because it is faster, more convenient, and more environmentally friendly. At present, many construction teams adopt dry and wet polishing methods. Dry polishing is used in the initial grinding step, when more concrete is removed. When the surface becomes smooth and the builder shifts from metal to finer resin, they usually become wet polished.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工