欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 常见问题

    工业厂房环氧地坪表面起皮原因

    2018-10-31 19:20:24 无锡盛发地坪科技有限公司 阅读

    环氧地坪表面起皮主要是基础与环氧涂层的粘接效果差才引起涂层起皮,防预环氧地坪表面起皮就要从粘结性入手,那些原因会影响材料与基础之前的粘接:基础地面太光滑会减弱材料的附着力,环氧材料配套选择不当,施工人员的技术差或者施工环境因素都会导致环氧地坪表面起皮。工业厂房环氧地坪表面为什么会起皮?起皮原因又是什么呢?

    Epoxy floor surface peeling is mainly caused by poor bonding effect between foundation and epoxy coating. To prevent the peeling of epoxy floor surface, we should start with bonding. Those reasons will affect the bonding between material and foundation: too smooth foundation will weaken the adhesion of material, epoxy material matching selection is not appropriate, construction personnel The technical difference or environmental factors of the construction will cause the surface of the floor to peel. Why does the surface of the epoxy floor of an industrial plant start to peel? Why? 1 1环氧地坪漆材料附着粘结性能差,硬度超高材料成膜后表面就会导常的平滑就会降低底漆涂跟砂桨中涂面或者面涂层之间的茹结

    11 Epoxy Floor Coatings have poor adhesion and adhesion. The surface of super-high hardness materials will be smoothly guided and the knot between the primer coating and the surface coating in the sand paddle will be reduced.

    附力性能效果。

    Attached force performance effect.

    z、基础表面处理不佳或者太光滑是环氧地坪起皮的致命伤,环氧地坪漆涂装前被涂物基础表面上有油污、蜡,水汽、灰尘和化学药

    Z. Poor or or too smooth surface treatment of the base is a fatal injury to the skin of the epoxy floor. Before painting, the base surface of the epoxy floor paint is covered with oil, wax, water vapor, dust and chemicals.

    品等。或表面预处理后至涂漆旅工的间隔时间过长涂装前被涂物表面应处理清洁,并应立即涂装施工。

    Goods and so on. Or the surface pretreatment to the paint traveler's interval is too long before the painting surface should be treated clean, and immediately painting construction.

    3、施工人员枝术的好差是环氧地坪工程的关键,如果施工枝术人员的施工不当把控不了施工现场就会出现很多质量隐患比如:材料的性能和施工基础地面信环境的估测,施工环境温度高涂装面积大,要注意材料配比的量大,材料还没施工会开始固化都致使环氧地坪漆漆膜未流平或者表面起趋粗糙、脱层都质量问题。

    3. The key to the epoxy floor project is the good or bad skill of the construction staff. If the construction staff can not control the construction site properly, there will be many quality hidden dangers such as: the performance of the material and the estimation of the ground information environment of the construction foundation, the construction environment temperature is high, the coating area is large, the amount of material proportion is large, and the material will appear. Before the construction will begin to solidify, the floor paint film has not leveled or the surface has become rough, delamination quality problems.

    4、施工人员经验不足,在施工时力度大小控制不了,就会出现涂膜厚薄不均匀或者涂层太厚,未实干就进入下道工序,会导致上涂层不千发白,脱层等问题。

    4. The lack of experience of the construction personnel, in the construction of the strength can not be controlled, there will be uneven film thickness or coating too thick, not solid into the next process, will lead to the coating is not a thousand white, delamination and other issues.



    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】