欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 环氧地坪

    环氧地坪底涂层施工要注意什么?

    2018-10-31 19:16:14 无锡盛发地坪科技有限公司 阅读

    环氧地坪底、中、面涂的合理配套可以使环氧地坪获得良好的使用性能,以满足多重性能要求。底涂是地面在经过表面处理后的第一道工序,主要目的是增强地面的结合力和基础,稳固基面残留的尘粒,并且对地面的潮气和碱有一定的封闭作用。在施工环氧地坪底涂层时候需要注意以下几个注意事项:

    Reasonable matching of epoxy floor, middle and top coatings can make the floor obtain good performance to meet multiple performance requirements. Primer is the first process of surface treatment of the ground. Its main purpose is to strengthen the adhesion and foundation of the ground, stabilize the residual dust on the ground, and seal the moisture and alkali on the ground. In the construction of epoxy floor coating, attention should be paid to the following matters: 1、如果底漆是有颜料的,必须搅拌均匀再进行涂布。

    1, if primers are pigments, they must be mixed evenly before coating.

    2、底涂层的厚度根据底漆种类来定,底漆的施工必须是完整、均匀、无露底,表面平整光滑无杂质的。

    2. The thickness of the primer depends on the type of primer. The construction of the primer must be complete, uniform, no exposure, smooth and free of impurities.

    3、为了防止咬底现象的出现,如果需要在底漆上涂带有强溶剂的涂料,必须等底漆完全干透再上。

    3. In order to prevent the occurrence of underbite, if it is necessary to coat the primer with a strong solvent coating, must wait until the primer is completely dry.

    4、建议在上底漆前打磨地面,这样可以增强涂层与底漆之间的附着力。

    4. It is recommended that the ground be ground before the primer, so that the adhesion between the coating and primer can be enhanced.



    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】