The best construction environment temperature of epoxy floor paint is 10-35 C. Generally speaking, it can also be constructed above 5 C. Under 5, the construction effect of epoxy floor paint is difficult to guarantee. The curing process of the two-component epoxy floor coatings slows down or stops when the temperature is below 5 C, which will seriously affect the curing performance of the floor coatings. If the strength and hardness decrease, the wear resistance will be worse, which will directly affect the service life. For the non-banyan self-leveling coating, the impact is greater, for example, the viscosity of the coating doubled, flow, leveling performance deteriorated, the construction of knife marks and other defects. In fact, lower temperature, solventless epoxy self leveling coatings are almost unavailable. 而温度高于35℃时 ，无溶剂自流平涂料的使用期会明显缩短，涂料很快增稠并干结报废，甚至出现爆聚现象。因此要求少量多次配料， 配好的漆尽快倒于地板上，增加散热。溶剂型涂料在高温下或者气流速度大的地方如门口、过道等处施工容易出现桔皮、皱纹、针孔等弊病，是由于溶剂挥发过快引起的，要补加高沸点、低挥发速率的稀释剂调整解决。
The service life of solvent-free self-leveling coatings will be shortened obviously when the temperature is higher than 35 C, and the coatings will thicken quickly and dry up and scrap, even burst. Therefore, a small amount of batching is required, and the paint will be poured onto the floor as soon as possible to increase the heat dissipation. Solvent-based coatings at high temperatures or in places with high air velocity, such as doorways, aisles and other construction prone to orange peel, wrinkles, pinholes and other drawbacks, is due to excessive solvent volatilization caused by adding high boiling point, low volatilization rate of diluents to adjust and solve.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工