欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 新闻资讯

    耐磨地坪不耐磨强度低的原因有哪些?

    2018-10-31 19:07:33 无锡盛发地坪科技有限公司 阅读

    不知道大家有没有这样的感觉,在使用耐磨地坪过程中,有时候会发现地面有一些小小的问题,比如说地面耐磨度和强度都不是太足,其实大家不用去想着是不是重庆耐磨地坪这个产品不好或者是怎么回事,只是因为环氧地坪材料或者是施工不到位造成的,大家以后也可以放心使用,那么今天我们就来给大家介绍一下耐磨地坪出现无耐磨、无强度的的原因有哪些,了解了这些我们在以后的施工过程中应该更加重视了。

    I don't know if you have this feeling, in the process of using wear-resistant floor, sometimes you will find some small problems on the ground, such as the ground wear resistance and strength are not enough, in fact, we do not have to think about whether the Chongqing wear-resistant floor is not a good product or what is going on, just because of floor materials. Or the construction is not in place, we can rest assured that the use of the future, so today we will tell you about the wear-resistant floor appeared wear-resistant, strength-free reasons, understand these we should pay more attention to the construction process in the future.

    1.耐磨材料质量差,将导致地面起尘、翻砂、退色、无强度等; 2.未能严格按标准施工,偷工减料,将导致地面起尘、翻砂、退色、无强度等; 3.地面施工结束后,未能未能及时养护或养护未到位,将导致地面起尘、翻砂等; 4.耐磨材料中的色料质量太差,地面将很快褪色; 5.耐磨材料中的骨料质量太差,地面将无强度、不耐磨、不耐用等; 6.在施工耐磨环氧地坪时,混凝土班组或施工耐磨地坪的技术人员,未按标准作业,将导致地面不平整等; 7.细石混凝土标号太低,诸如此类的问题都会影响耐磨地坪的质量。 总结一下不难发现,重庆耐磨地坪出现问题,主要还是有材料、施工和养护这三方面原因造成的,如果这三点都做好了,耐磨地坪就会非常完美了,也不会出现一些质量问题了。

    1. The poor quality of wear-resistant materials will lead to dust, sand, discoloration, no strength, etc. 2. Failure to strictly follow the standards of construction, jerry-building, will lead to dust, sand, discoloration, no strength, etc. 3. After the completion of the ground construction, failure to timely maintenance or maintenance is not in place, will lead to dust, sand, etc. 4. Wear-resistant materials in the color quality is too poor, the ground will soon fade; 5. Wear-resistant materials in the aggregate quality is too poor, the ground will be no strength, wear-resistant, not durable, etc. 6. In the construction of wear-resistant floor, concrete teams or construction of wear-resistant floor technicians, not in accordance with the standard operation, will lead to uneven ground; 7. Fine stone; Concrete marks are too low, and such problems will affect the quality of the wearable Floor. Summing up, it is not difficult to find that wear-resistant floor in Chongqing problems, mainly due to materials, construction and maintenance of these three reasons, if these three points are done, wear-resistant floor will be very perfect, and will not appear some quality problems. 


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】