欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    环氧地坪出现局部破损的现象该如何来进行修复呢

    2018-10-31 19:06:02 无锡盛发地坪科技有限公司 阅读

    环氧地坪出现局部破损的现象该如何来进行修复呢?假如破碎面积非常小,而且就简单的几处,我们可以直接用填料进行填平,然后上环氧漆,假如面积大,而且破损点多,那么就要将那一个面的环氧地坪漆先铲除,然后重新局部施工。

    How to repair the epoxy floor failure? If the broken area is very small, and on a few simple places, we can directly fill with filler, and then on epoxy paint, if the area is large, and more damage points, then it is necessary to remove the surface of the floor paint first, and then re-local construction. 步骤如下

    The steps are as follows

    一、采用铣刨机和研磨机进行处理。1mm以下的环氧地面可以使用研磨机进行打磨处理,去除旧环氧油漆;1mm以上的环氧砂浆必须使用铣刨机来除砂浆层,根据旧地面的厚度可调节铣刨机深度,配合研磨机使用可提高工作效率。

    First, use milling machine and grinding machine for processing. Epoxy ground below 1mm can be ground with a grinder to remove the old epoxy paint; epoxy mortar above 1mm must use a milling machine to remove the mortar layer, according to the thickness of the old ground can be adjusted milling machine depth, with the use of a grinder can improve work efficiency.

    二、也可以使用脱漆剂溶解或其他酸碱性化学品溶解:将调配混合好的碱液脱漆剂直接用涂刷在旧环氧地坪漆表面,等把地坪漆涂膜腐蚀破坏掉,再用工具把漆铲除掉。

    Second, you can also use paint remover to dissolve or other acid-base chemicals to dissolve: the mixed alkali paint remover will be directly applied to the surface of the old floor paint, and so on the floor paint film corrosion damage, and then use tools to remove the paint.

    三、铲除完毕用打磨机打磨平,进行重新上漆的环节。

    Three. Finish the process by grinding and leveling the grinding machine.



    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】