Epoxy floor paint coating appears roughness of the following four main points: 1, because the construction environment is unclean, there is more dust, dust will appear roughness sticking to the film; 2, but filter epoxy floor paint, so that impurities mixed inside, when the film drying will be displayed on the floor; 3, because the paint began; Gelatinization is still continuous construction, because the epoxy floor paint is a two-component, after adding curing agent will occur chemical reaction, and then cured into a magic, if the time is still in the construction will result in rough; 4, the construction site temperature is too high, so that the thinner evaporation speed, epoxy floor paint is not leveling has been cured. 由于丙烯酸树脂环氧地坪漆色浅、耐候、保色、快干和有一定的耐腐蚀性。这些年，常造成单组分常温型木器家私漆。在地坪漆涂装过程中，这类漆也常出现漆膜肿胀，漆膜不平坦、光芒不平均、渗色、漆膜起皱、漆膜色包、发花等天气。
Because acrylic resin floor paint is light, weather resistant, color fast drying and has certain corrosion resistance. These years often result in one component, normal temperature wooden furniture. In the process of painting floor paint, this kind of paint often appears film swelling, film uneven, uneven light, color infiltration, film wrinkling, film color bag, blossom and other weather.
When the epoxy floor paint is applied, the wet substrate or the wet film is coated. The underlying paint does not match the top coat, and the film is affected by acid, alkali and heat.
After drying the coating film, the primer is separated from the base arch or the topcoat is separated from the primer arch, with gas or liquid inside, which is unevenly distributed.
Strict enforcement of the substrate drying and nominal treatment of epoxy floor paint painting rules, in the putty or film in the case of complete drying re-construction coating. Floor paint painting, to use non-contagious cloth paint film or dry air spray paint film again, to remove water vapor or dew before the construction. It is necessary to choose matching putty and matching primer, avoid using insect base paint and acid curing primer.
The rough way to treat epoxy floor paint is:
1. In the construction of epoxy floor paint must be cleaned before the construction site, the paint according to identity distribution, and then use 120 mesh gauze to filter the paint after the construction.
2, before construction, the amount of paint should be accounted for according to the construction time, and the proportion and concentration of paint should be stopped. It can't be matched with the thinner. It needs slow dry high flying points.
3. Processing the upper layer well, starting from the bottom, we should do a good job according to the construction requirements, the middle layer to eradicate rough weather, surface construction must be cleaned up before the middle layer, deny dust-free construction, so that we can deal with epoxy floor paint this kind of rough weather.
When the film of floor paint becomes swollen, only the film that has already achieved good results can be polished off. Choose two primers matched with primers to dry, and then apply top coat from scratch.
标签:  环氧地坪 地坪 环氧地坪施工 环氧地坪漆