To eradicate wall pollution, we must understand the source of wall pollution. Generally speaking, there are two sources: first, cross-construction leads to ground mud or epoxy floor paint, colorants, etc. splashed on the wall; second, before construction, the construction personnel did not have an effective protection of the completed wall, epoxy floor paint construction also did not pay attention, resulting in the ground material stained to the wall. 针对交叉施工导致的污染问题，施工团队只要建议业主让地面施工提前进行，避免与其他工种比如水电、墙面一同作业，就能轻松解决。
In view of the pollution problem caused by cross construction, the construction team can easily solve the problem by advising the owners to advance the ground construction and avoid working with other types of work such as hydropower and wall.
As for the pollution caused by inadequate wall protection, the floor construction team needs to use plastic film, or decoration special protective film, beautified paper, etc. to cover and protect the wall skirt and column foot which have been completed, and tear the protective film after completion. Of course, if the use of rolling, upsetting method of construction of Chongqing epoxy floor paint, operation is careful enough, you can also not use protective film, the specific situation also needs to be judged according to the actual situation.
If the wall contamination has occurred, the construction team should immediately remedy, as soon as possible with a shovel or greasy knife to remove contaminants, for difficult to remove the colorant or floor paint with a strong solvent-type cleaner, or with paint remover dissolved, and then clean up with a shovel. After cleaning up the contaminants, use sandpaper to fine grind the residue on the top of the wall and the bottom of the corner until exposed to the plaster or putty bottom of the original wall, and then brush the wall paint.
标签:   环氧地坪 环氧地坪漆 环氧地坪施工 地坪