Can the curing agent floor completely seal the ground? No, no. The principle of curing agent floor is that the solidifying agent infiltrates into the concrete pores. After the chemical reaction, the gel forms a part of the air discharged from the concrete, but it does not completely seal the pores of the concrete so as to maintain a "breathable" state, especially in a humid environment (such as a basement), if the pores of concrete can not be guaranteed to breathe. The state will cause the vapor to arch the whole concrete and cause the shell to fall off. The breathable state of the pore will greatly reduce the life of the concrete. 不管原地面平整度怎样，做了固化剂地坪都可以达到超平的镜面效果？
No matter how smooth the original surface is, can the curing agent floor achieve the super flat mirror effect?
This sentence is wrong. Concrete sealant is permeable ground material, it can not form any form of thickness on the surface of stacking, its flatness depends on the grinding construction to complete, if the surface of the concrete drop is very large, in order to achieve good flatness, then the depth of grinding will increase, and may even find the concrete Layers are completely polished, so to get a mirror effect, then the newly poured concrete flatness must meet the national concrete pouring standards, and the old concrete can only achieve regional "mirror" effect.
The more dosage of curing agent, the better?
No The concrete absorbs the concrete sealant and solidifying agent according to its pore size to decide, the penetration depth is decided according to the molecular size of the solidifying agent, too much will easily form a layer on the surface, so the amount of appropriate best, which requires the experience of the site construction personnel, so when entering the site construction, the proofing is very heavy. Yes.
The use of curing agent floor can make the ground as hard as iron?
No, no. The principle of the sealing agent is that the solidifying agent infiltrates into the concrete pores. After the chemical reaction, the gel forms a part of the air in the concrete, which makes the concrete more dense and wear-resistant. But because the poured concrete because of the label, humidity, temperature and other reasons, resulting in different strength of concrete after forming, concrete sealant can generally increase the hardness of the original ground about 4 degrees, so the hardness of concrete sealant floor and the original ground hardness has a close relationship.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 固化剂地坪