How thick is the epoxy floor paint? The following three thickness decisions: (1) if the ground foundation is good, the requirements are not very high to do an epoxy coating is very appropriate, the thickness of 0.5-0.8 on the ok; (2) if the ground foundation is good, high wear resistance, high hardness, then this time to do epoxy coating or self-leveling; (3) if do a thin coating Suggested thickness of 2.5-3.0; (4) If the ground is not good, high requirements, then should use epoxy self-leveling floor, the middle of the mortar layer, and then the entire thickness of the ground had better do a 3mm. The thickness of the self leveling epoxy floor coating material is (2 + 0.2) mm.
Factory epoxy floor project:
1. Product requirements for cleanliness: Different products have different requirements for cleanliness of the production environment, such as furniture and electrical appliances workshop cleanliness can be lower, food and drug factory cleanliness requirements of the highest. The cleanliness of the workshop is proportional to the thickness of the epoxy floor paint coating in Xuzhou. The thicker the coating, the better the performance of the floor such as moisture-proof, dust-proof and mildew-proof. Ordinary light industrial plants, such as garment factory floor, do ordinary thin-coated epoxy floor, about 0.5mm can be; and pharmaceutical factory floor must do more than 1mm of self-leveling epoxy floor. Floor of pharmaceutical factory (epoxy self leveling)
2. The requirement of the ground bearing capacity of the workshop: if there are a large number of large-scale machinery in the workshop, or if the products of the workshop are heavier and the forklift truck is to be pulled, the ground bearing capacity is required to be higher. If the floor bearing capacity of the workshop is high, it is not suitable for thin-coated epoxy floor. Choose thick self-leveling Chongqing floor paint and Chongqing curing agent floor.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工