欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 环氧地坪

    客户应该如何验收环氧地坪工程?要点

    2018-10-31 07:03:52 无锡盛发地坪科技有限公司 阅读

    环氧地坪漆的验收标准1、环境温度为25℃时,施工后2-3天应达到实干,即硬度达到完成固化的80%左右;2、表面不能出现发粘现象;3、气泡:平涂型、砂浆型无气泡,自流平允许1个小气泡/10平方米;4、流平性好,无镘刀痕,大面积接口处基本平整;5、无浮色发花,颜色均匀一致,大面积接口处允许有极不明显的色差;6、无粗杂质,但允许有空气中的浮尘掉落在造成的极小缺陷;7、环氧地坪表面应平整平滑,光泽度应达到设计要求(高光泽≥90、有光≥70、半光50~70),平涂型为有光、水性为半光~无光;

    The acceptance standard of epoxy floor paint is 1, when the ambient temperature is 25, it should be dry 2-3 days after construction, that is, the hardness reaches 80% of the curing; 2, the surface can not be sticky; 3, bubbles: flat coating, mortar type without bubbles, self-leveling allows a small bubble / 10 square meters; 4, good leveling, no trowel marks, large Area interface is basically flat; 5, no floating color hair, uniform color, large area interface allows very inconspicuous color difference; 6, no coarse impurities, but allows the air to fall in the dust caused by the minimal defects; 7, epoxy floor surface should be smooth, gloss should meet the design requirements (high gloss < 90, there are) Light is equal to 70 or half light 50~70. 



    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】