In the process of coating, epoxy floor paint is usually applied to brush equipment such as paint brush. During the construction, the paint is brushed onto the epoxy floor with a paint brush, and the paint is evenly spread on the floor. Brush equipment such as paint brush is usually made from pig * s, wool, wolf hair and synthetic fiber. In the process of brushing, there are usually brush marks, loss of gloss, flow, uneven coating, wrinkling, roughness or coarse grains, which affect the engineering quality of epoxy floor paint.
The use of coating equipment may give epoxy floor paint a shortcoming, familiar with its reasons, we have to take charge of the precise way of construction, to prevent brush marks, loss of gloss, sagging, unequal painting shortcomings.
During the construction of epoxy floor, the coating unevenness may occur when the brushing force is heavy or light, and when the speed is fast or slow. If the strength is heavy, the coating is thin, and it is possible to form a non-leveling brush mark, if the strength is light, the coating is thick, and the anticorrosive floor paint may form a sagging.
Brushing equipment such as paint brushes dipped in too much oil, floors and other coatings oil absorption time is too short may form a coating sagging phenomenon. The formation of brush marks in epoxy floor coatings is not only due to the formation of brushing force, poor painting skills, too many brushing times, wet film semi-dry form is still brushing, these elements may form epoxy floor coatings loss of leveling to form brush marks or loss of light and other shortcomings.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工