In the production of epoxy floor paint, if we want to obtain good quality epoxy floor paint, then we need to follow a certain factory standard to produce it. The raw materials used in the production of epoxy floor paint should be prepared according to certain production standards to ensure that there will be no major problems in the production process. 事实上，外观也是与内在质量紧密联系的。如果环氧地坪漆涂料沉淀严重，又有块状凝絮，其质量绝对难以符合要求。而膏状的外观表明环氧地坪漆涂料均匀性好，质地细腻，必然容易涂刷，施工面积大，且贮存期长。由此可见，标准列出的指标值只是一个最基本的合格要求，而产品之间的质量竞争，有更进一步的对比。
In fact, appearance is also closely related to internal quality. If the floor paint is seriously precipitated and there is lump floc, the quality of the floor paint is absolutely difficult to meet the requirements. The pasty appearance shows that the floor paint has good uniformity, fine texture, easy to brush, large construction area and long storage period. Thus it can be seen that the indicators listed in the standard are only a basic qualification requirement, and the quality competition between products, there is a further contrast.
The solid content of floor coatings consists of two parts, one is the weight of the film-forming material (also known as binder), the other is the weight of the pigment and filler (collectively called pigment). The quality of floor coatings mainly depends on the quality and content of the film-forming material, not the total solid content, so most coatings are named after the film-forming material. The resin content of the floor paint and emulsion type (or solvent type) floor paint has a difference of 30%-50%, and the film thickness is quite different when the unit area consumption is equal.
As the name implies, the covering power of floor paint coatings is the ability to be coated on the base surface without revealing the background color, the current standard has been used for the ratio, the data reflects the same role.
The original standard (GB 9756-88) requires less than 250g/m2 of floor paint covering power, that is, 4 m2 per kilogram can be painted, in the wet state is qualified without exposure. Note: The wet covering ability is much lower than the dry covering ability. The coating area should be based on the wet covering force. Otherwise, the quality of the surface coating will be reduced.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工