Epoxy resin anti-corrosion floor coating process is the key to the treatment of the base surface, it is related to the coating layer can be firmly attached to the ground, whether the coating is smooth and bright, my company attaches great importance to the treatment of the base surface. Clean area of the ground should be good integrity, smooth, wear-resistant, impact-resistant, not easy to accumulate static electricity, easy to dust cleaning. Epoxy self-leveling floor is widely used at present. Epoxy self-leveling floor is a new kind of ideal ground cleaning material. It has the dual role of corrosion resistance and cleanliness, excellent wear resistance and smoothness, thus ensuring the cleanliness of the workshop floor and the overall beauty.
1. In order to achieve the perfect effect of painting, experts suggest that the construction company should take part in leveling the cement leveling layer on the ground which has not been leveled. When the cement is initially set, the ground is ground by the professional ground machinery of the construction company. On this basis, the surface effect of the epoxy coating will be smoother and brighter, and the service life will be improved.
2. About 28 days after the cement layer is dried, the ground is polished with a grinder to make the surface smooth and the cement capillaries open.
3. For oily cement floors (cooking oil, oil), spray the surface wetted with water with Medicinal Rubber and scrub repeatedly until there is no oil pollution.
4, for the floor too alkaline (ph>8), first use the relevant treatment agent neutralization, and then rinse with water.
5. The wet ground is dried to meet the construction requirements by absorbing water, drying, sunlight and hot air blower.
6. For old painted ground such as diamond ground, old painted ground, first with mechanical shovel old paint, and then on the poor cement, diamond ground treatment and grooming. After the ground is treated in this way, the unstable surface of old cement and diamond is removed, and coarse surface is formed, so as to improve the adhesion of the new coating and improve the service life of the coated floor.
Suzhou epoxy resin anticorrosive floor 环氧地坪的验收标准：
Acceptance criteria for epoxy floor:
1. When the ambient temperature is 25 C, the hardness should reach 80% after 2-3 days.
2, the surface can not appear sticky phenomenon;
3, bubble: flat coated, mortar type no bubbles, self leveling allows 1 small bubbles /10 square meters;
4, good leveling, no trowel marks, large area of the interface is basically smooth.
5, no floating color and flower, uniform color, large area interface allows very insignificant chromatic aberration;
6, there is no coarse impurity, but it allows the floating dust in the air to drop into the minimal defect.
7. The surface of the floor should be smooth and smooth, and the gloss should meet the design requirements (high gloss (> 90, gloss (> 70, half gloss 50-70). The flat coating type is glossy and the water-borne is half gloss-no gloss.
8, orange peel and mortar anti slip surface effect should be very obvious. No VOC emissions are widely used in modern industrial floor finishing.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工