In the course of construction, the Code for Acceptance and Acceptance of Construction Projects and the relevant domestic laws and regulations are strictly implemented to ensure that the construction quality meets the excellent standards. 1. Industry standards for construction and acceptance of hardened and abrasion-resistant floors: 1. Assessment according to the construction specifications and acceptance standards stipulated by the existing steel scrap cement for the overall floors in China; 2. Current standards for the industry of abrasion-resistant floors: 检验项目、检验要求、检验方法、检验数量、
Inspection items, inspection requirements, inspection methods, inspection quantities, etc.
平整度 、小于4㎜ 、平尺、塞尺、 代表性的自然间抽查10% 、
Flatness, less than 4, flat ruler, feeler gauge, representative natural sampling 10%.
裂缝 、不允许、 目测、 全数、
Cracks, not allowed, visual, total,
抗压强度、 非金属骨料、 不小于70Mpa 、一个工程一组、
Compressive strength, non-metallic aggregate, not less than 70Mpa, one engineering group.
Metal aggregate, not less than 80Mpa,
耐磨性 、非金属骨料、 不大于290MG/250转、 一个工程一组、
Wear resistance, non-metallic aggregate, no more than 290MG/250 turn, an engineering group.
Metal aggregate, not larger than 200MG/250
Two, quality assurance measures:
1. Establish and improve the project manager-based quality assurance system and quality management network, vertical to the end, horizontal to the side, conscientiously implement the technical management system, the implementation of responsibility to people.
2. Strengthen the technical management, conscientiously implement the state regulations, operating procedures and various management systems; clarify the post responsibility system, do a good job of technical disclosure, and establish a technical assessment system.
3. Implement total quality management, adhere to the quality of the three inspection system (i.e. automatic control, mutual control, hand-over control), model system and post responsibility system, the implementation of the name of the main operators, grade, quality grade listing on the wall system.
4. Strengthen the inspection of raw materials, and strictly implement the inspection system of various raw materials. First, inspect the factory certificate, strictly control the measurement of various mix ratios.
5. Strengthen cooperation with civil construction units, coordinate and supervise each other, supervise the strength of concrete, supervise the flatness and elevation of concrete.
6. Strengthen the management of technical data, strictly in accordance with the work quality testing and evaluation standards, timely collation and filing, so that the data and the project go on simultaneously, truly reflect the actual situation of the project.
标签:   环氧地坪 地坪 环氧地坪施工 环氧地坪漆