With people's attention to industrial plants, many people have begun to use epoxy floor paint as floor coatings, but if not pay more attention to maintenance in the later period, it is easy to cause the service life of the floor decline in advance, all aspects of performance will also be aging. Today Xiaobian will give you details about how to maintain and maintain epoxy floor paint after construction. Ten construction solutions for epoxy floor paint floor
The epoxy floor paint will need 7-10 hours' maintenance time after construction. During the maintenance period, "water or other organic solutions should be avoided to infiltrate the surface of the floor, according to the ground requirements" in the case of conditional paraffin protection can prevent ground scratches. Those who enter the workshop must change their shoes. They should not wear stiff rubber soles, iron soles and high heels. Sediment belts should be avoided.
In the workshop, so as not to scratch the surface of epoxy floor paint.
Before entering the plant, the equipment "lays cardboard boxes on the floor and then boards on it" and uses forklift trucks with large rubber wheels to locate the mechanical equipment so as to avoid pressure explosion or scratch the surface of the floor during the transportation of the equipment.
If the ground has coarse and hard sand, mud and so on should sweep clean promptly, in order to avoid the sand grinding abrasion damage ground "when using the tool, should avoid the tool scattering to hit the ground.
All hard feet, such as iron chairs, iron tables, iron shelves, etc. must be soft plastic, rubber wrapped or padded with paper to avoid scratching the surface of the floor during use. It is forbidden to drag and move heavy goods when they touch the surface of the floor. When carrying heavy goods, multi-wheel scooters, forklift trucks and forklift trucks should be used to unload the goods, so as to avoid damage, scratch the ground, vehicles, forklift trucks and forklift trucks when they are running.
The wheels of carts and forklifts used in the epoxy floor workshop shall be made of hard or elastic rubber wheels. When cleaning the ground, use a soft, water-absorbing mop or a dry-wet dual-purpose vacuum cleaner "can also be cleaned with clean water, detergent, soap water and other cleaning machines. In the absence of a cleaning machine, "Sawn wood powder can be sprinkled and then swept clean, must not be used to strengthen the chemical solvent, such as xylene, banana water cleaning. The area that is easy to be polluted should be cleaned 1-2 times with a wide cloth mop every day.
Oil leakage parts, often cleaned with sawdust, so as to avoid the deterioration of dirty oil and adsorbed ash layer into a stubborn stain. Wide cloth mops can be used to drive sawdust to absorb oil from the floor in large areas of oil immersion to keep the floor clean and oil-free.
Wear or scratch caused by long service time, small area can be repaired locally. "If the area is large, it is recommended to roll again one time. If there is a large film damage, it should be repaired in time so as to repair the oil before infiltration. When the workshop flushing the floor with water, "avoid oil and water mixture deposited on the floor of epoxy floor.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工