Different epoxy floors have different performance and different construction requirements. In order to have beautiful and clean epoxy floors, it is suggested to look for professional and responsible manufacturers of Suzhou epoxy floors. What factors should be considered in the construction of epoxy floor? There are many kinds of epoxy floor, such as epoxy resin floor, epoxy self-leveling floor, epoxy mortar floor, etc. Different types of epoxy floor need to be determined according to the type and nature of the epoxy floor before construction, to make high-quality epoxy floor, we need to What are the factors?
1. The bottom condition of the foundation should be considered in the construction of epoxy floor.
1. Selection of epoxy floor types, if the epoxy floor construction in the first floor, and the high water level, the base did not do waterproof treatment, or concrete is not fully dry, if the choice of oily or solvent-free floor will be dangerous of bubbling, can consider the choice of water-based epoxy floor.
2. Primer selection, according to the strength of the substrate selection of closed primer, loose sand strength of the substrate should be selected long penetration time solvent-free epoxy sealing primer, and high strength substrate such as hardened ground, terrazzo can choose solvent-based primer.
3. Selection of coating thickness, according to the strength of the base, flatness and mechanical properties of the coating thickness, substrate surface flatness is poor, to obtain a flat appearance of the floor, the coating should be thickened accordingly. 二、地坪机械性能在环氧地坪施工时需考虑
Two. The performance of floor machinery should be considered in the construction of epoxy floor.
1. Wear resistance. What vehicles will be used when the epoxy floor is used?
2, pressure resistance, how much load can the epoxy floor used to bear?
3. Whether the impact resistance is strong or not, and whether the impact force will cause the epoxy floor coating to peel off.
All these need to be considered.
Three. Floor chemistry should be considered in the construction of epoxy floor paint.
1, acid and alkali resistance: the type and concentration of corrosive chemicals used.
2. Solvent resistance: solvent type and contact time.
Four. Considering the cleanliness requirements of Suzhou epoxy floor.
Examples: GMP workshop, preparation room, operating room, food production and packaging workshop, electronics factory and other places require higher levels of gas purification, cleanliness, so it is recommended to use epoxy self-leveling floor.
Five. Aesthetics needs to be considered when constructing epoxy floor.
Color requirements; brightness requirements; flatness requirements.
Six. Cost estimate of epoxy floor.
Select suitable floor type and thickness according to budget.
Seven. Consider the safety requirements of epoxy floor.
If the floor is in an oily environment or a ramp, an epoxy skid resistant floor is required.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工