Epoxy floor is a high-strength, wear-resistant, beautiful floor, with no seams, solid, good resistance. Anticorrosive, waterproof, dust-proof, convenient maintenance, low maintenance costs and so on. Epoxy floors were originally used for functional floors, such as anti-corrosion, wear-resistant, anti-skid, developed into general industrial floors; in addition to functional requirements, but also with decorative effects. On the basis of the wide application of industrial floor, with the continuous improvement of people's living standards, it has been widely used in family decoration. The epoxy floor has become one of the fastest growing industries in China and has attracted public attention. It can achieve factory production like cement products. The prospect is more impressive!
The epoxy floor should be maintained and cleaned after it is finished and put into use to ensure that the workshop environment is clean and truly clean production environment is achieved. At the same time, the daily maintenance of the ground is included in the daily management system, which is conducive to prolonging the life of the floor, reducing the rate of renovation, and ensuring the smooth progress of production. The maintenance of the floor is as important as the maintenance of equipment. The following are the main items for the maintenance of the epoxy floor: 1、边生产边施工情况下，施工环境要有足够隔离区，以免灰、砂粒等渗入未干透的漆膜环氧地坪。
1. Under the condition of production and construction, the construction environment should have enough isolation area to prevent ash and sand from seeping into the epoxy floor.
2. Easy to be polluted areas, more conspicuous facial areas, corridor mop cleaning 1-2 times a day.
3. If the ground has coarse and hard sand grains, mud and other impurities should be timely swept clean, so as to avoid grinding the ground, reduce ground wear.
4. Employees should change soft-soled shoes before entering the clean area. Plastic blankets should be installed at the junction where sand and mud can be easily brought into and out of the clean area to facilitate the removal of footwear debris.
5. Forklift trucks and forklifts should be placed flat when unloading, so as to avoid the side nephew, drag and scrape the ground.
6, vehicles, forklifts and forklifts avoid braking as far as possible.
7. Frequent oil leakage parts, often clean with sawdust, in order to avoid oil denaturation, adsorption ash layer, become stubborn stains. Large area of oil immersion, wide cloth mop can be used to drive sawdust to drain the floor oil.
8, repair tools as far as possible to avoid falling to the ground.
9, if there is a large film damage, timely repair, so that oil seepage before the foundation for repair work. When water is washed on the floor of the workshop, avoid oily water mixture depositing at the depth of damage.
标签:   环氧地坪 地坪 环氧地坪施工 环氧地坪漆