For the construction of epoxy floor, there are various specifications, from the epoxy resin floor construction plan to the selection of floor paint, and then to each link and its treatment process, need to be fine. Before construction, treatment of prime land is a very important and indispensable part. So today, Xiaobian, an epoxy floor company, will tell you about the treatment of prime land. 1、首先需要清理地面的水分，不然会使用的过程有积水而引起水泡，所以需要让地面保持干燥；
1. First of all, the water on the ground needs to be cleaned up, otherwise the process will be used to cause blisters, so the ground needs to be kept dry;
2. Do a good job of cleaning the surface of the ground, for dust and some silt cleaning, you can use a large-scale vacuum cleaner to work;
3. For the surface, the air distance is 2.5mm, and the moisture content is below 6.5%.
4, for industrial cement air must be properly maintained before construction.
5. Hair the surface of the floor, and use a dust-free grinder to finish, use a vacuum cleaner for cleaning;
6. Putty should be used to fill the holes in the surface of the ground and obvious uneven places. After drying, dust should be ground and cleaned.
7. The space of the site should also be dust-free, water-free, oil-free, so that the construction of the floor can be more smoothly;
8, for external surface cement floats there will be some impurities to clean.
To sum up, it is necessary to ensure that the ground is free of any unevenness, flat, no dust, no moisture (this is very important), no oil pollution, etc. before the construction of the epoxy floor, to ensure that the ground is clean and hygienic.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 环氧树脂地坪