欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    关于旧厂房环氧地坪的翻新的几点建议

    2018-10-28 12:16:46 无锡盛发地坪科技有限公司 阅读

    方案一,将原来的旧环氧地坪用气锤进行打毛,把环氧地坪面层全部破坏,露出水泥基层面,然后将垃圾清理干净,在细石混凝土铺设前,涂建筑界面剂一层,因为浇筑的细石混凝土厚度只有5-6公分,为了防止裂纹出现,建议在混凝土下面铺一层钢丝网片,在混凝土铺设的时候,撒上一层金刚砂环氧地坪材料,用机械镘进行收光,做成金刚砂耐磨地面,这样造价低,能够经受抗压耐磨的使用要求。如果需要清洁的话,等混凝土固化干燥后在做环氧薄涂环氧地坪就可以达到清洁的要求了。

    The first plan is that the old epoxy floor is groomed with air hammer, the epoxy floor is destroyed completely, the cement base is exposed, and then the garbage is cleaned up. Before laying the fine stone concrete, a layer of building interfacial agent is applied, because the thickness of the cast fine stone concrete is only 5-6 cm. In order to prevent cracks, it is suggested that the rubbish be cleaned up. A layer of steel wire mesh is laid under the concrete, and when the concrete is laid, a layer of diamond floor material is sprinkled, and the mechanical calender is used for light absorption to make a diamond wear-resistant floor, which has low cost and can withstand the requirements of compression and wear resistance. If it is necessary to clean, the concrete after solidification and drying in the epoxy thin coating floor can meet the requirements of cleaning. 

    方案二,如果不做混凝土浇筑,建议甲方用铣刨机将旧的环氧地坪铣刨掉,再用吸尘打磨机将毛面打磨平整,然后涂刷界面剂,在施工水泥自流平进行找平,等待水泥自流平凝固后,在制作环氧地坪,可根据生产的需要制作环氧砂浆式地坪或环氧自流平地面。无论哪种方案,都要涂刷界面剂,只要是做水性产品,一般都要涂刷界面剂进行渗透,防止混凝土层后水泥自流平层的脱落,保证地面的长久使用。

    If no concrete is poured, Party A is advised to mill and planed the old epoxy floor with a milling machine, then use a dust-absorbing grinder to smooth the surface, then brush the interface agent, leveling the construction cement self-leveling, waiting for the cement self-leveling solidification, making the epoxy floor ring according to the needs of production. Oxygen mortar floor or epoxy self leveling ground. No matter what kind of scheme, it is necessary to brush the interfacial agent. As long as it is a water-based product, it is generally necessary to brush the interfacial agent to penetrate, to prevent the shedding of the self-leveling layer of cement after the concrete layer, and to ensure the long-term use of the ground.

    方案三,不做水泥混凝土,不做水泥自流平,把旧环氧地坪用K30打磨机进行打磨,磨尘清理后,用环氧底漆进行渗透,底漆固化后,用环氧树脂砂浆进行全面找平,找平后案程序施工环氧地坪,至于施工环氧地坪的种类,要看企业的具体事用情况,普通区域做成环氧砂浆地坪,重点洁净部位,制作环氧自流平地坪,这样不但可以节约成本,也可以做到地坪的充分利用。需要防静电的车间,建议制作环氧防静电地坪。 给了业主三种旧地面翻新方案,让业主有重点的选择,合理的制作地坪,做到结合成本,结合资金投入,结合生产实际做好企业适用的环氧地坪。

    Plan 3, do not do cement concrete, do not do cement self-leveling, the old epoxy floor with K30 grinder for grinding, grinding dust cleaning, with epoxy primer penetration, primer solidified, with epoxy resin mortar for a comprehensive leveling, leveling the case after the construction of epoxy floor, as for the construction of the type of epoxy floor, to see The specific business situation of the enterprise, ordinary area made of epoxy mortar floor, focus on clean parts, making epoxy self-leveling floor, so that not only can save costs, but also can make full use of the floor. Antistatic workshop is recommended, and epoxy anti-static floor is recommended. Three renovation schemes are given to the owner, so that the owner has a choice of key points, a reasonable production floor, to achieve the combination of cost, combined with capital input, combined with the actual production of epoxy floor suitable for the enterprise.


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】