欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 环氧地坪

    为什么环氧地坪老有刷痕? 变色的解决方法

    2018-10-28 11:39:52 无锡盛发地坪科技有限公司 阅读

    很多人对于环氧地坪种类的了解非常有限,但今天我们先把这个以及郑州环氧地坪环氧地坪种类、等诸如此类的问题都放下,来看看"为什么环氧地坪老有刷痕? 环氧地坪变色的解决方法",希望您能有更多的了解【新闻】为什么环氧环氧地坪老有刷痕? 环氧环氧地坪变色的解决方法刷痕产生的原因:

    Many people know very little about the types of epoxy floors, but today we will put this and Zhengzhou epoxy floors, types of epoxy floors, and so on, to see "why epoxy floors always brush? Solutions to the discoloration of epoxy floors "Hope you can learn more about why epoxy floors are always brushed? How to solve the problem of epoxy floor color change? A、施工原因:施工方法错误,涂料搅拌后施工时间过长,滚刷均匀,涂层薄厚控制不到位。

    A. Construction reasons: construction method is wrong, paint mixing after the construction time is too long, rolling brush uniform, coating thickness control is not in place.

    B、工具原因:滚筒质量不合格,滚筒表面处理有误。

    B, tool reason: drum quality is not qualified, roller surface treatment is wrong.

    C、涂料本身的原因:主要是涂料的流平性差,涂料的粘度过高。有触变性的填料或助剂。

    C, paint itself: mainly due to poor levelling of paint and excessive viscosity of coatings. Thixotropic filler or auxiliaries.

    解决的方法:

    Solution:

    A、注意施工方法,涂料的熟化时间不要过长。滚筒的二端到圆角,涂层的一遍厚度尽可能不要小于0.15mm。

    A, pay attention to the construction method, and the curing time of the paint should not be too long. The two ends of the drum to the fillet, the thickness of the coating should not be less than 0.15mm as much as possible.

    B、买好一点的滚筒,滚筒使用前用胶带处理一下滚筒表面

    B, buy a little roller, use the tape to handle the roller surface before using the drum.

    C、涂料的原因,增加涂料的流平性,降低涂料的粘度,尽可能减少有触变性的填料和助剂地坪,为什么环氧地坪老有刷痕?特别要注意墙面涂料的流平剂用在地坪涂料的现象。

    C. Causes of coatings, increase the leveling of coatings, reduce the viscosity of coatings, as far as possible to reduce the thixotropic fillers and additives on the floor, why the epoxy floor brush marks? Special attention should be paid to the phenomenon of leveling agent used in floor coatings.

    您可能会喜欢:

    You may like it:

    环氧地坪厂家告诉你环氧地坪掉色原因有以下几种

    The epoxy floor manufacturers tell you that the reasons for the epoxy floor fading are as follows.

    a、材料的耐候性不好,收到阳光的暴晒就会变黄;

    A, the weatherability of materials is not good, and it will turn yellow when exposed to sunlight.

    b、清漆的酸值较高与储存的铁桶发生化学反应,使得颜色变深;

    The acid value of B and varnish is higher than that of the storage iron barrel, making the color darker.

    c、颜料密度差异使密度大的往下沉,密度小的上升,导致颜料分层;

    C, the difference of pigment density makes the density larger and smaller density rise, leading to pigment layering.

    d、涂料本身发生质变,使得固有的着色力降低,导致褪色或色变;

    D, the paint itself changes in quality, causing the inherent coloring power to reduce, resulting in fading or color change.

    e、金属粉末颜料被残留的游离酸腐蚀,导致颜料变成乌绿色;

    E and metal powder pigments are corroded by residual free acid, resulting in pigments turning to dark green.

    环氧地坪厂家介绍四点解决办法:

    Epoxy floor manufacturers introduce four solutions:

    1、地坪漆在使用时要进行长时间的搅拌.

    1. Floor paint should be stirred for a long time when used.

    2、金属的颜料与清漆要求分开储存,以免发生腐蚀现象;

    2. Metal pigments and varnishes shall be stored separately to avoid corrosion.

    3、按需要选择树脂和颜料,例如室外地坪漆则需选择耐光耐热性较好的丙烯酸地坪漆.耐紫外线的聚氨酯地坪漆;

    3. Select resins and pigments as needed, such as outdoor floor paint, acrylic floor paint with better light and heat resistance, polyurethane floor paint with UV resistance.

    4、酸性较高的涂料最好不要使用铁质的桶来装.

    4, the higher acid coating is best not to use iron barrels to install.


    标签:   环氧地坪 地坪 环氧地坪施工 环氧地坪漆
    无锡环氧地坪 技术支持:【易商科技】