欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 常见问题

    环氧地坪中环氧底涂需要注意的几个步骤!

    2018-10-28 11:31:39 无锡盛发地坪科技有限公司 阅读

    环氧地坪施工前要对地面进行环氧地坪基础处理外,另外我们需要的环氧地坪漆材料有环氧底漆、环氧中涂、环氧面漆、腻子粉、石英砂、稀释剂;施工设备需要磨削机、打磨机、铣刨机、抛丸设备、吸尘器、扫把、搅拌机、称量、桶、滚筒、环氧地坪漆(平口、圆口)镘刀、平底刮板。下面我们介绍一下环氧地坪中环氧底涂需要注意的几个步骤:

    The epoxy floor should be treated before the construction of the epoxy floor, in addition, we need epoxy primer, epoxy intermediate coating, epoxy topcoat, putty powder, quartz sand, diluent; construction equipment needs grinding machine, grinding machine, milling machine, shot blasting equipment, vacuum cleaner, broom, mixer, weighing. Volume, barrel, drum, floor paint (flat mouth, round mouth) trowel and flat bottom scraper. Now let's introduce some steps to be taken in the epoxy floor coating. 1、施工作业前需要确保地面干净,没有杂物粘附,如有的话立即清除;

    1, before construction work, we need to ensure that the ground is clean, there is no debris adherence, if any, it should be removed immediately.

    2、准备好材料,将环氧树脂和固化剂按正确比例混合搅拌至均匀;

    2. Prepare the material and mix the epoxy resin and the curing agent in the right proportion.

    3、搅拌均匀后,采用刮刀或滚筒人工或机械施涂的方法施涂,一般来说刮刀都需要人工来操作。

    3. After stirring evenly, the scraper or drum is applied by manual or mechanical method. Generally speaking, the scraper needs manual operation.

    4、底涂作业一定要求浸透好并加强附作力。

    4. Primer must be soaked and strengthened.

    5、前面四个步骤完成后待第一遍干固后,再进行施涂环氧中涂层。

    5. After the first four steps are completed, after the first time, the epoxy coating will be applied again.


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】