What should we pay attention to when cooling weather on epoxy floor? Today, the type of epoxy floor to introduce to you is the content of this aspect, I hope you through this introduction, we can be in Zhengzhou epoxy floor cold weather construction need to pay attention to what aspects of knowledge and understanding [essence] How to use epoxy floor resin paint epoxy floor cold weather construction need to pay attention to Which? 我们在使用环氧环氧地坪树脂漆的时候一定要考虑好环境条件哦！如果说周围的环境不够好的话，那么我们的出来的效果也会有很大的区别的呢！想要建造出最完美的环氧环氧地坪树脂漆可是要下一番苦功夫的哦！
When we use epoxy floor resin paint, we must take good environmental conditions into consideration. If the surrounding environment is not good enough, then our results will be very different! It takes a lot of hard work to build the best epoxy floor resin paint.
Step 1: We need to check that the horizontal control lines of the surrounding environment have been set up, and we need to re-check the position deviation;
Step 2: We need to see if the paint on the ground is ready, or need to be reviewed before it can be passed;
Step 3: We want to measure the temperature of the environment is not in 30 degrees, humidity should also pay attention to not too wet, otherwise the use of epoxy floor resin paint will appear after the chemical reaction oh!?
The application of epoxy floor resin paint is very extensive, not only can be used on the epoxy floor, if some machinery companies, such as washing machine factory can also use epoxy floor resin paint floor, how to use epoxy floor resin paint such products will be more environmentally friendly Oh!
Try to choose special winter curing floor coatings. If the floor coating is too thick to be coated, epoxy floor construction can be added less than 5% of the volatilization rate of faster solvents, such as acetone, ethanol acetate, butyl acetate and so on.
Floor coatings can be stored in a warm environment or heated with hot water or steam (possibly resulting in a decline in paint quality). Unless the special coating heating equipment is used, the temperature should not exceed 38 degrees. When the flash point of the paint is below 38 C, the heating temperature should not exceed its flash point. Pay attention to open the lid of the packaging barrel, avoid water vapor into, prohibit direct heating with open fire or ignition, heating must pay attention to safety.
When floor construction is carried out below 10 C, it is generally necessary to operate at 10:00 a.m. and 3:00 p.m. to make full use of the high temperature time to organize the construction force and complete as soon as possible.
It is not suitable for outdoor epoxy mortar floor construction when fog or coated surfaces are covered with moisture and frost. The surface temperature of epoxy mortar should be higher than dew point 3, and the temperature should not be lower than the minimum temperature required for drying of epoxy floor coating in Zhengzhou.
标签:   环氧地坪 环氧地坪漆 环氧地坪施工 地坪