欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 常见问题

    环氧地坪施工后的“雀斑”怎么办?解决方法

    2018-10-28 10:18:37 无锡盛发地坪科技有限公司 阅读

    环氧地坪的出现改变了很多工厂的车间环境,环氧地坪漆是现在比较环保使用的一种地面漆。在对于环氧地坪的使用中我们还有需要了解的地方,在河南环氧地坪漆的施工后的一些问题是我们需要关注的,在施工后比较突出的问题就是在涂膜的表面上会出现局部的收缩,而形成麻麻点点。这样的情况要怎么处理呢?下面我们就一起来了解一下。

    The appearance of epoxy floor has changed the workshop environment of many factories. Epoxy floor paint is a kind of floor paint which is used more environmentally. In the use of epoxy floor, we still need to understand the place, in Henan epoxy floor paint after the construction of some problems we need to pay attention to, after the construction of the more prominent problem is that there will be local shrinkage on the surface of the film, and the formation of pockmarks. How do we deal with such a situation? Now let's look at it together. 原因一:环氧地坪漆涂料中硅油类的低表面活性的助剂加入量过多。

    Reason 1: the low surface active additives of silicone oil in epoxy floor paint are too high.

    解决方法:应控制硅油等表面活性剂的加入量。

    Solution: we should control the amount of silicone oil and other surfactants.

    原因二:溶剂或稀释剂中所含低沸点、高沸点的溶剂过多,而且配比也不合适。

    Reason 2: Solvents or diluents contain too many solvents with low boiling point and high boiling point, and the ratio is not appropriate.

    解决方法: 应注意低沸点、高沸点溶剂的使用量和各种沸点溶剂的配比。

    Solution: attention should be paid to the usage of low boiling point, high boiling point solvent and various boiling point solvents.

    原因三:被涂物表面的油垢、蜡质、金属皂类和潮气等未除净。被漆物表面留有残酸、残碱 。

    Reason three: grease, wax, metal soap and moisture on the surface of the coating are not removed. Residual acid and alkali residue on the surface of the paint.

    解决方法:被涂物表面的油垢、蜡质、金属皂类、残酸、残碱和潮气等在环氧地坪漆施工前应处理干净。

    Solution: The grease scale, wax, metal soap, residual acid, residual alkali and moisture on the surface of the coating should be cleaned before the application of epoxy floor paint.

    原因四:喷涂施工中带入油或水,喷枪和物面间距离太近。

    Reason four: spraying oil or water into the construction process, the distance between the spray gun and the material surface is too close.

    解决方法:环氧地坪施工前应检查喷漆机器的油水分离器是否正常,应掌握好喷枪和物面间的距离。

    Solution: Before the construction of epoxy floor, the oil-water separator of the spray painting machine should be checked whether it is normal or not, and the distance between the spray gun and the object surface should be well controlled.

    原因五:喷枪喷嘴口径太小,而喷漆压力又过大。

    Reason five: the nozzle size of the spray gun is too small, and the spray paint pressure is too large.

    解决方法:选择好喷枪的口径和喷涂压力。

    Solution: select the caliber and spray pressure of the spray gun.

    原因六:喷涂河南环氧环氧地坪施工中涂料粘度过低或过高。

    Reason six: paint viscosity in Henan epoxy floor construction is too low or too high.

    解决方法:掌握好合适的施工粘度。

    Solution: grasp the proper construction viscosity.

    原因七:溶剂挥发得太快,涂膜还来不及流平。

    Reason seven: solvents evaporate too fast, and the film is too late for leveling.

    解决方法: 不能选用挥发性太强的溶剂施工。

    Solution: do not choose too strong solvent for construction.


    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】