Red orange, yellow, green, blue and purple are our common colors. It is not the popular floor paint that can be perfectly qualified for these seven colors and can be blended with any desired colors. It can satisfy consumers'different pursuit of colors. The diversification of colors means that the color of epoxy floor paint is in the process of color blending. High complexity, epoxy floor paint color mixing mainly refers to the color matching paint, it directly affects the brightness of the floor coating color.
Floor color card is an important tool for color matching of epoxy floor paint. After determining the customer's requirements for color, color matching is done according to the mosaic and color circle. Then color card is used to determine the color. Then the computer is used to prepare epoxy floor paint to distinguish several colors contained in the excellent sample and determine the proportion of each color. The ratio. In the process of blending epoxy floor paint, the main color with large dosage and low dyeing power should be added first, then the dark color with high dyeing power should be added slowly, and the color change should be observed at any time and continuously stirred, and the principle of "from light to deep" should be followed. When the pigment with strong dyeing power is added, never excessive.
Epoxy floor paint is an oily paint, after color matching will exist before and after the paint drying film color difference, paint color before drying, generally light, when the paint drying, the color will deepen. When compounding compound paint, we should choose the same quality paint to mix with each other, the solvent should also be soluble, because if the miscibility of the paint is not good, it will affect the quality of the floor, and even layered, gelatinized phenomenon. In order to make the color of the epoxy floor paint more distinct than the original paint, we should choose the appropriate background color, so that the base color and the top paint color can produce better results after overlapping.
The color diversity of epoxy floor paint makes color matching a complicated and meticulous work. It needs to know the performance of all kinds of pigments in the construction, and to accurately judge the color difference. Therefore, consumers must make a multi-faceted inspection when choosing the manufacturer of epoxy floor paint to polish their eyes and beautify the floor surface. It is the first criterion to judge the quality of the floor.
Construction process of epoxy floor paint
Epoxy floor paint is bright, true, beautiful, wear-resistant, waterproof, anti-corrosion and other characteristics, according to its main material is distinguished by wear-resistant floor, epoxy floor and polyurethane floor. Although there are many kinds of epoxy floor coatings, but never change, different types of epoxy floor paint construction process is roughly the same.
First, the first step
Of course, the surface of the ground is cleaned up, if the ground has a lot of sundries, even bricks and stones, or shelved for a long time, there is bound to be a lot of dust, these cluttered ground, we can not accept the epoxy floor paint, rushed to use epoxy floor paint construction, its effect is greatly discounted! So it is very necessary to use a grinder to grind the ground and clean up the dust. Only when the foundation is laid, will there be a lot of harvest, right?
The two and second steps
After the ground is cleaned, it is necessary to apply epoxy sealing primer in alignment to achieve the effect of sealing cracks, because the surface gap of the floor is not uniform, some rough places will have a large number of cracks or small holes, which will affect the effect of epoxy floor paint construction.
The three and third steps
Add a certain amount of diluent to the purchased epoxy floor paint to allow it to penetrate into the surface of the inner layer, increasing its anti-permeability, which requires us to carry out the epoxy floor paint construction process, we need to buy diluent configuration Oh!
The four and fourth steps
The fourth step is also the most important process, which is divided into three levels: the lower level, the middle level and the upper level. First is the treatment of the lower layer, that is, the first layer, which is mainly a refinement of the surface of the floor, so that the surface more smooth and tightly sealed, in preparation for the spraying of the middle layer. Secondly, when the underlying layer is finished, we need to polish and clean its model, then apply an epoxy floor coating, and then use high-pressure spraying method to spray its middle layer of epoxy floor paint, the main purpose is to smooth the surface.
Finally, the epoxy floor paint coating treatment, because this layer is directly in contact with people, in order to make it more durable, in the spraying before the middle surface should be again polished, clean treatment, and then high-pressure air-free spraying method after the spraying.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪