欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    如何去除环氧地坪施工中产生的针孔

    2018-10-24 18:41:45 无锡盛发地坪科技有限公司 阅读

    那么如何去掉环氧地坪施工中发生的针孔?环氧地坪涂料施工黏度过大,施工场所温度较低,涂料拌和后因为停置的时间过短,仍有残存的气泡。防治办法:施工黏度不宜过大,施工场所温度不宜过低。涂料拌和后,应放置一段时间,待气泡不见后再施工。溶剂调配不当,低沸点挥发性溶剂用量过多,造成涂膜表面敏捷枯燥,而底部的溶剂不易逸出。

    Then how to remove the pinholes in the construction of epoxy floors? Floor coating construction viscosity is too high, construction site temperature is low, paint mixing because of the short time to stop, there are still residual bubbles. Prevention and control measures: the construction viscosity should not be too large, and the temperature in the construction site should not be too low. After mixing, the paint should be placed for a period of time until the bubbles are not visible. The improper solvent allocation and excessive use of volatile solvents at low boiling point make the surface of the film agile and dry, and the solvent at the bottom is not easy to escape. 防治办法:留意溶剂的调配,应操控低沸点溶剂的用量。

    Prevention and control methods: pay attention to the allocation of solvents, and control the consumption of low boiling solvents.

    涂猜中有水分,空气中有尘埃。

    There is water in smear, and dust in the air.

    防治办法:施工前应除去涂猜中的水分和空气中的尘埃。

    Prevention and control method: before construction, the water should be removed and the dust in the air should be removed.

    在发汗和有油污的地上上施工,施工环境温度过高或被施工地上的温度过高。

    In the construction on the sweating and oily ground, the construction environment temperature is too high or the construction ground temperature is too high.

    防治办法:施工地上应处理洁净后再进行施工,留意施工场所的环境湿度,被施工地上的温度,不该高于施工是的环境温度。

    Preventive measures: the construction site should be cleaned before construction, pay attention to the environmental humidity of the construction site, the ground temperature should not be higher than the construction is the environmental temperature.



    标签:   地坪 环氧地坪 环氧地坪漆 环氧地坪施工 无锡环氧地坪
    无锡环氧地坪 技术支持:【易商科技】