1. In the production-side construction, the construction environment should have enough isolation area to prevent dust, sand and other infiltration into the wet epoxy floor. 2. Easy to be polluted areas, more conspicuous "facade" parts of the corridor should be cleaned with a wide cloth mop 1-2 times a day. 3. If there are coarse and hard sand and mud on the epoxy floor, it should be cleaned up in time so as to avoid grinding and reduce wear and tear. 4、车、铲车装卸时注意货物平放，避免侧倒、拖拽划伤地面。
4. When loading and unloading trucks and forklifts, the goods should be placed flat to avoid landing and dragging and scratching the ground.
5. Oil leakage parts, often clean with crushed sawdust, so as to avoid oil denaturation, dust adsorption, become stubborn stains. Large area of oil immersion, wide cloth mop can be used to drive the crushed sawdust to drain the floor oil.
6. If there is a large film damage, it should be repaired in time so as to repair the oil before infiltration. When water is washed on the floor of the workshop, avoid oily water mixture depositing at the depth of damage. So when choosing floor paint, at the beginning of floor design, we should first understand our specific needs, and the characteristics of various types of floor, advantages and disadvantages, in order to avoid the specific construction of the floor caused delays in production, resulting in losses.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工