1. Under the condition of production and construction, the construction environment of epoxy floor should have enough isolation area to prevent ash and sand from seeping into wet epoxy floor. 2. Easy to be polluted areas, more conspicuous facial areas, corridor mop cleaning 1-2 times a day. 3. If the ground has coarse and hard sand grains, mud and other impurities should be timely swept clean, so as to avoid grinding the ground, reduce ground wear. 4、员工进入洁净区之前应换软底鞋；在容易带进砂粒、泥浆的交接处、出入口设置塑料毯，方便员工出入时清除鞋底杂物。
4. Employees should change soft-soled shoes before entering the clean area. Plastic blankets should be installed at the junction where sand and mud can be easily brought into and out of the clean area to facilitate the removal of footwear debris.
5. Forklift trucks and forklifts should be placed flat when unloading, so as to avoid the side of nephew, drag, drag and scratch the ground.
6, vehicles, forklifts and forklifts avoid braking as far as possible.
7. Frequent oil leakage parts, often clean with sawdust, in order to avoid oil denaturation, adsorption ash layer, become stubborn stains. Large area of oil immersion, wide cloth mop can be used to drive sawdust to drain the floor oil.
8, repair tools as far as possible to avoid falling to the ground.
9, if there is a large film damage, timely repair, so that oil seepage before the foundation for repair work. When water is washed on the floor of the workshop, avoid oily water mixture depositing at the depth of damage.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工