Introduction of epoxy floor paint manufacturer: some problems we should pay attention to when we use floor. First: in the construction of the floor, there are cross construction, the construction environment should be enough isolation area, so as to prevent ash, sand and other infiltration of the wet film. Second: vulnerable areas, more conspicuous doorways, corridors should be cleaned with a wide cloth mop 1-2 times a day. Thirdly, when people enter the floor factory, they should change soft soles; plastic blankets should be installed at the junction where sand and mud can be easily brought in and out to facilitate the removal of footbed debris.
Fourth: If the ground has coarse and hard sand particles, mud should be timely swept clean, in order to avoid grinding the ground, reduce ground wear.
Fifth: when the truck is unloading, the goods should be placed flat to prevent the side of the goods from dragging and scratching the epoxy floor.
Sixth: vehicles, forklifts and forklifts avoid braking as far as possible. Where oil is often leaked, sawdust can be used to clean, lest oil denaturation, adsorption ash layer, become stubborn stains. When the area of the oil immersion area is relatively large, we can use the wide cloth mop to drive the sawdust to drain the floor oil.
Seventh: when the workshop rinse the floor with water, avoid oil and water mixture depositing at the depth of damage. If the epoxy floor is used well, the number of years of use will be extended, usually about 10 years.
Eighth: machine repair tools to avoid hitting the floor paint surface. If there is a large area of film damage, timely repair, in order to oil infiltration into the foundation before repair operations.
标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工