欢迎光临无锡盛发地坪科技有限公司官网!【环氧地坪_防静电地坪_停车场地坪_耐磨地坪】材料生产,销售和施工的高新技术企业.

    示例图片三
    网站首页 > 新闻资讯 > 地坪知识

    讲解环氧地坪表面的处理有哪些步骤

    2018-10-22 07:42:02 无锡盛发地坪科技有限公司 阅读

    环氧地坪表面的处理有哪些步骤? 1、新竣工的水泥地面必须经过一定的养护后方可施工,约28天。 2、清除表面的水泥浮浆、旧漆以及粘附的垃圾杂物。 3、彻底清除表面的油污,用克油王清洗剂处理。 4、清除积水,并使潮处彻底干燥。 5、表面的清洁需用无尘清扫机及大型吸尘器来完成。 6、平整的表面允许空隙为2~2.5mm,含水量在6%以下,PH值6~8。 7、环氧地坪表面的打毛,需用无尘打磨机来完成,并用吸尘器彻底清洁。 8、对环氧地坪表面的洞孔和明显凹陷处应用腻子来填补批刮,实干后,打磨吸尘。

    What are the steps in the treatment of epoxy floor surface? 1, the newly completed cement floor must undergo certain maintenance before it can be constructed for about 28 days. 2, remove the surface of cement slurry, old paint and adhesion of garbage debris. 3. Thoroughly remove the oil from the surface and use the king oil cleaner. 4, clear up the water and make the tide completely dry. 5, surface cleaning must be done with dust-free sweeper and large vacuum cleaner. 6. The smooth surface allows 2 to 2.5mm voids, and the water content is below 6%, pH 6~8. 7. The surface of the floor must be finished with a dust-free grinding machine and thoroughly cleaned with a vacuum cleaner. 8. Use putty to fill and scrape holes and obvious depressions on the surface of the floor. After dry, grind and dust.



    标签:   环氧地坪 地坪 环氧地坪漆 环氧地坪施工
    无锡环氧地坪 技术支持:【易商科技】